Home » Bosch Manuals » Dishwashers » Bosch SGE53B55UC » Manual Viewer

Bosch SGE53B55UC Use and Care Manual - Page 29

Setting options, Setting the electronic, delay time, Starting the wash, cycle, Activating the button

Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

a The cycle is set and the cycle button flashes. a The remaining run time of the cycle appears on the display. 13.4 Setting options You can set options to complete the chosen cycle. Note: The available options depend on which cycle is selected. ▶ Press the button for the relevant option. a The option is set and the option button flashes. 13.5 Setting the electronic delay time You can delay the start of the wash cycle by up to 24 hours. 1. Press . a "h:01" appears on the display. 2. Use to set the required start time for the wash cycle. 3. Press . a This activates the electronic delay time. Tip: To deactivate the electronic delay time, press repeatedly until "h:00" appears on the display. 13.6 Starting the wash cycle ▶ Press . a The wash cycle has ended when the display shows "0h:00m". Notes ¡ If you want to add more dish- ware while the appliance is running, do not use the collecting tray as a handle for the upper rack. You might touch the partially dissolved tablet. Basic Operation en-us ¡ You can only change a cycle in progress if you can cancel it first. → "Terminating the wash cycle", Page 30 ¡ To save energy, the appliance switches off automatically 10 minutes after the end of the wash cycle. If you open the appliance door immediately after the wash cycle has ended, the appliance will switch off after 4 seconds. 13.7 Activating the button lock The button lock prevents the appliance from being operated accidentally or incorrectly while running. ▶ Press onds. for approx. 3 sec- a The button lock is activated and will be automatically deactivated at the end of the cycle. a flashes on the display when the appliance is running. a The button lock remains activated with a power failure. 13.8 Deactivating the button lock ▶ Press onds. for approx. 3 sec- 13.9 Interrupting the wash cycle 1. Press On/Off. The program is saved and the appliance switches off. 2. Press On/Off. 3. Press cycle. to resume the wash 29

Section	Page
Dishwasher	1
en-us	2
Table of contents	2
1 IMPORTANT SAFETY INSTRUCTIONS	4
1.1 Safety definitions	4
1.2 General information	4
1.3 Intended use	5
1.4 Restrictive Use	5
1.5 Grounding instructions	5
1.6 Safe use	6
1.7 Risk to children	8
1.8 State of California Proposition 65 Warnings	8
2 Preventing material damage	9
2.1 Safe use	9
3 Environmental protection and energy-saving	9
3.1 Saving energy	9
3.2 AquaSensor	9
4 Familiarizing yourself with your appliance	10
4.1 Appliance	10
4.2 Controls	11
5 Dishwasher Cycles	14
5.1 Energy Guide	15
5.2 Favorite	15
5.2.1 Save Favorite on the appliance.	16
6 Options	16
7 Features	16
7.1 Upper rack	17
7.1.1 Adjusting upper rack with the side levers	17
7.2 Lower rack	17
7.3 Silverware Basket	18
7.4 Cup shelf	18
7.5 Flip tines	18
7.5.1 Folding down the tines	18
7.6 Knife Shelf	19
7.7 Rack heights	19
8 Before using for the first time	19
8.1 Initial use	19
9 Water softening system	20
9.1 Overview of water hardness settings	20
9.2 Setting the water softening system	20
9.3 Special Dishwasher Salt	21
9.3.1 Adding dishwasher salt	21
9.4 Switching off the water softening system	21
10 Rinse aid system	22
10.1 Rinse aid	22
10.1.1 Adding rinse aid	22
10.2 Setting the amount of rinse aid	22
10.3 Switching the rinse aid system off	23
11 Detergent	23
11.1 The correct detergents	23
11.2 Incompatible detergents	24
11.3 Information on Detergent	24
11.4 Adding Detergent	24
11.5 Detergent table	25
12 Dishware	25
12.1 Damage to glass and dishware	25
12.2 Loading dishware	26
12.3 Removing dishware	27
12.4 Loading patterns	27
13 Basic Operation	28
13.1 Protection against unintentional operation	28
13.2 Switching on the appliance	28
13.3 Setting a cycle	28
13.4 Setting options	29
13.5 Setting the electronic delay time	29
13.6 Starting the wash cycle	29
13.7 Activating the button lock	29
13.8 Deactivating the button lock	29
13.9 Interrupting the wash cycle	29
13.10 Terminating the wash cycle	30
13.11 Switching off the appliance	30
14 Basic settings	31
14.1 Overview of the basic settings	31
14.2 Changing the basic settings	32
15 Home Connect™	32
15.1 Home Connect™ quick start	33
15.1.1 Installing the app	33
15.1.2 Connecting appliance to the WLAN home network (Wi-Fi)	33
15.2 Home Connect™ settings	33
15.3 Remote start	33
15.3.1 Activating remote start	33
15.4 Remote Diagnostics	34
15.5 Software update	34
15.6 Data Protection	34
16 Cleaning and maintenance	35
16.1 Cleaning the tub	35
16.2 Cleaning agent	35
16.3 Tips on appliance care	35
16.4 Machine Care	35
16.4.1 Run Machine Care	36
16.5 Filter system	37
16.5.1 Cleaning filters	37
16.6 Cleaning the spray arms	38
17 Troubleshooting	39
17.1 Clean wastewater pump	49
18 Transportation, storage and disposal	50
18.1 Removing the appliance	50
18.2 Vacation and Storage	50
18.3 Transporting the appliance	50
18.4 Disposal of your old appliance	51
19 Customer service	51
19.1 Model number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.)	51
19.2 AquaStop® Pledge	51
20 Technical specifications	53
20.1 Information regarding Free and Open Source Software	53
21 Statement of Limited Product Warranty	53
21.1 What this Warranty Covers & Who it Applies to	53
21.2 How Long the Warranty Lasts	54
21.3 Extended Warranty	54
21.4 Repair/Replace as Your Exclusive Remedy	55
21.5 Out of Warranty Product	55
21.6 Warranty Exclusions	55

Match case Limit results 1 per page

Basic Operation

en-us

The cycle is set and the cycle

button flashes.

The remaining run time of the

cycle appears on the display.

13.4

Setting options

You can set options to complete

the chosen cycle.

Note:

The available options de-

pend on which cycle is selected.

▶

Press the button for the rele-

vant option.

The option is set and the option

button flashes.

13.5

Setting the electronic

delay time

You can delay the start of the

wash cycle by up to 24 hours.

Press

"h:01" appears on the display.

Use

to set the required

start time for the wash cycle.

Press

This activates the electronic de-

lay time.

Tip:

To deactivate the electronic

delay time, press

repeatedly

until "h:00" appears on the dis-

play.

13.6

Starting the wash

cycle

▶

Press

The wash cycle has ended

when the display shows

"0h:00m".

Notes

If you want to add more dish-

ware while the appliance is run-

ning, do not use the collecting

tray as a handle for the upper

rack. You might touch the par-

tially dissolved tablet.

You can only change a cycle in

progress if you can cancel it

first.

→

"Terminating the wash cy-

cle", Page 30

To save energy, the appliance

switches off automatically

10 minutes after the end of the

wash cycle. If you open the ap-

pliance door immediately after

the wash cycle has ended, the

appliance will switch off after 4

seconds.

13.7

Activating the button

lock

The button lock prevents the ap-

pliance from being operated acci-

dentally or incorrectly while run-

ning.

▶

Press

for approx. 3 sec-

onds.

The button lock is activated and

will be automatically deacti-

vated at the end of the cycle.

flashes on the display

when the appliance is running.

The button lock remains acti-

vated with a power failure.

13.8

Deactivating the

button lock

▶

Press

for approx. 3 sec-

onds.

13.9

Interrupting the wash

cycle

Press On/Off.

The program is saved and the

appliance switches off.

Press On/Off.

Press

to resume the wash

cycle.