Bosch SGE53B55UC Use and Care Manual - Page 44
Change your Detergent.
View all Bosch SGE53B55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
en-us Troubleshooting Issue Cause and troubleshooting Wipeable or watersoluble coatings inside the appliance or on the door. Detergent substances are deposited there. These coatings cannot generally be removed with chemicals. ▶ Change your Detergent. ▶ Clean the appliance mechanically. White coating is deposited inside the appliance. 1. Adjust the water softening system correctly. In most cases you will need to increase the setting. 2. If necessary, change your detergent. Special salt dispenser is not screwed tight. ▶ Screw the special salt dispenser tight. There are stubborn white coatings on the dishware, inside the appliance or on the door. Detergent substances are deposited there. These coatings cannot generally be removed with chemicals. ▶ Change your Detergent. ▶ Clean the appliance mechanically. The hardness range is set incorrectly, or the water hardness is greater than 62 °E (8.9 mmol/l). ▶ Set the Water softening system to the water hardness or add special salt. 3in1/organic/eco detergent is not effective enough. ▶ Set the Water softening system to the water hardness and use separate detergents (name brand, special salt, rinse aid). Too little detergent is being used. ▶ Increase the amount of detergent used or change Detergent . Washing program selected too weak. ▶ Select a more intensive washing program. Tea residue or lip- Dishwashing temperature is too low. stick marks on dish- ▶ Select a program with a higher dishwashing ware. temperature. Too little detergent is being used or is unsuitable. ▶ Use a suitable Detergent and follow the manufacturer's instructions for the amount to be used. Dishware has been precleaned too intensively. The sensors then choose a weaker program. Stubborn soiling cannot be entirely removed. ▶ Only remove large remnants of food and do not prerinse dishware. 44