Bosch SGE53B55UC Use and Care Manual - Page 41

Issue, Cause and troubleshooting

Get Bosch SGE53B55UC PDF manuals and user guides View all Bosch SGE53B55UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Troubleshooting en-us Issue A different error code appears in the display window. E:01-00 to E:90-10 Cause and troubleshooting A technical fault is present. 1. Press . 2. Pull out the power cord plug of the appliance or switch off the breaker. 3. Wait at least 2 minutes. 4. Insert the power cord plug of the appliance in a power outlet or switch on the breaker. 5. Switch the appliance on. 6. If the problem occurs again: ‒ Press . ‒ Turn off the water faucet. ‒ Pull out the power cord plug. ‒ Contact customer service → Page 51 and give the error code. Dishware is not dry. No rinse aid used or dosage set too low. 1. Add Rinse aid → Page 22. 2. Set the amount of rinse aid to be dispensed. → "Setting the amount of rinse aid", Page 22 Cycle or cycle option has no drying phase, or drying phase is too short. ▶ Select a wash cycle with drying. → Page 14 Some option buttons decrease the drying result. Water collects in recesses of dishware or silverware. ▶ Position dishware at an angle where possible. The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying performance. 2. Use a different combined detergent with a bet- ter drying performance. Extra Dry not activated to improve drying performance. ▶ Activate Extra Dry. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Troubleshooting
en-us
41
Issue
Cause and troubleshooting
A different error
code appears in the
display window.
E:01-00 to E:90-10
A technical fault is present.
1.
Press
.
2.
Pull out the power cord plug of the appliance or
switch off the breaker.
3.
Wait at least 2 minutes.
4.
Insert the power cord plug of the appliance in a
power outlet or switch on the breaker.
5.
Switch the appliance on.
6.
If the problem occurs again:
‒
Press
.
‒
Turn off the water faucet.
‒
Pull out the power cord plug.
‒
Contact customer service
→
Page 51
and
give the error code.
Dishware is not dry.
No rinse aid used or dosage set too low.
1.
Add Rinse aid
→
Page 22
.
2.
Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page 22
Cycle or cycle option has no drying phase, or dry-
ing phase is too short.
▶
Select a wash cycle with drying.
→
Page 14
Some option buttons decrease the drying re-
sult.
Water collects in recesses of dishware or silver-
ware.
▶
Position dishware at an angle where possible.
The combined detergent used has a poor drying
performance.
1.
Use rinse aid to improve drying performance.
2.
Use a different combined detergent with a bet-
ter drying performance.
Extra Dry not activated to improve drying perfor-
mance.
▶
Activate Extra Dry.