Bosch SPE53B52UC Use and Care Manual - Page 19

Before using for the, first time, Rinse aid system

Get Bosch SPE53B52UC PDF manuals and user guides View all Bosch SPE53B52UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Before using for the first time 8 Before using for the first time Before using for the first time Apply the settings for the first use. 8.1 Initial use On initial use or after reset to the factory settings, you will need to configure settings. Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect™ app. → "Home Connect™ quick start", Page 30 Requirement: The appliance has been installed and connected. 1. Add rinse aid. → Page 19 2. Switch on the appliance. → Page 25 3. Set the amount of rinse aid. → Page 19 Tip: You can change these settings and other Basic settings → Page 28 at any time. Rinse aid system 9 Rinse aid system Rinse aid system You can use the rinse aid system and rinse aid to get dishware and glasses rinsed perfectly without spots. 9.1 Rinse aid For optimum drying results, use rinse aid. Only use rinse aid intended for household dishwashers. Adding rinse aid If the rinse aid refill indicator lights up, fill the dispenser with rinse aid. Only use rinse aid intended for household dishwashers. Before using for the first time en-us 1. Press the catch on the lid of the dispenser for rinse aid and lift . 2 1 2. Add rinse aid up to the max mark. max 3. If rinse aid spills out, remove it from the tub. Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close the lid of the dispenser for rinse aid. a The lid clicks into position. 9.2 Setting the amount of rinse aid If there are streaks or water spots on dishware, change the amount of rinse aid. 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows . 3. Press repeatedly un- til the display shows the value set at the factory r04. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Before using for the first time
en-us
19
8
Before using for the
first time
Apply the settings for the first use.
8.1
Initial use
On initial use or after reset to the
factory settings, you will need to
configure settings.
Tip:
Connect your appliance to a
mobile device. You can conve-
niently change all settings using
the Home Connect™ app.
→
"Home Connect™ quick start",
Page 30
Requirement:
The appliance has
been installed and connected.
1.
Add rinse aid.
→
Page 19
2.
Switch on the appliance.
→
Page 25
3.
Set the amount of rinse aid.
→
Page 19
Tip:
You can change these set-
tings and other Basic settings
→
Page 28
at any time.
9
Rinse aid system
You can use the rinse aid system
and rinse aid to get dishware and
glasses rinsed perfectly without
spots.
9.1
Rinse aid
For optimum drying results, use
rinse aid.
Only use rinse aid intended for
household dishwashers.
Adding rinse aid
If the rinse aid refill indicator lights
up, fill the dispenser with rinse
aid. Only use rinse aid intended
for household dishwashers.
1.
Press the catch on the lid of the
dispenser for rinse aid
and
lift
.
1
2
2.
Add rinse aid up to the max
mark.
max
3.
If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the
wash cycle.
4.
Close the lid of the dispenser
for rinse aid.
a
The lid clicks into position.
9.2
Setting the amount of
rinse aid
If there are streaks or water spots
on dishware, change the amount
of rinse aid.
1.
Press
.
2.
To open the basic settings,
press
for 3 seconds.
a
The display shows
.
3.
Press
repeatedly un-
til the display shows the value
set at the factory r04.