Bosch SPE53B52UC Use and Care Manual - Page 24
Removing dishware, Loading patterns
View all Bosch SPE53B52UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
en-us Dishware ¡ To save energy and water, load the machine with the number of place settings specified. ¡ For better washing and drying results, position items with curves or recesses at an angle so water can run off. 1. Remove large remnants of food from dishware. To save resources, do not prerinse dishware under running water. 2. Observe the following when arranging dishware: - Put heavily soiled dishware in the lower rack, e.g. pans. The more powerful spray jet ensures that the dishwashing result will be better. - To avoid damage to dishware, arrange it so it is stable and cannot tip over. - To avoid injury, arrange silverware with the points and sharp edges down. - Position containers with the openings facing down so no water can collect in them. - Do not block the spray arms - make sure that they can turn freely. - Do not place small parts in the collecting tray and do not block it with dishware so as not to obstruct the lid of the detergent dispenser. 11.3 Removing dishware CAUTION Dishes can be very hot immediately after the cycle ends. ▶ Open the door slightly and al- low dishes to cool for a few minutes before unloading. 1. To prevent water dripping onto dishware, unload it starting at the bottom and working up. 2. Check the washing tank and accessories for soiling and clean if necessary. → "Cleaning and maintenance", Page 31 11.4 Loading patterns Recommended loading patterns. 9 place settings: Lower rack Upper rack 24