Bosch SPE53B52UC Use and Care Manual - Page 39

Cleaning filters, Filter system,

Get Bosch SPE53B52UC PDF manuals and user guides View all Bosch SPE53B52UC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Troubleshooting en-us Issue Dishware is not dry. Silverware is not dry. Appliance interior still wet after wash cycle. Food remnants on dishware. Cause and troubleshooting Dishware removed too early or drying process not yet ended. 1. Wait until the program ends. 2. Only remove dishware 30 minutes after the program has ended. Rinse aid used has a limited drying performance. ▶ Use a name-brand rinse aid. Eco products may have limited effectiveness. Silverware not arranged properly in the silverware basket or silverware drawer. Droplets can form on the contact points of silverware. 1. Arrange silverware individually where possible. → Page 23 2. Avoid points of contact. Not an error. Condensation drying creates water droplets in the tub. This is normal. Moisture in the air condenses on the inside walls of the appliance, runs off, and is pumped out. No action required. Dishware was placed too close together or rack is overfilled. 1. Arrange dishware with sufficient space in be- tween. The spray jets must reach the surfaces of the dishware. 2. Avoid points of contact. Spray arm rotation is blocked. ▶ Arrange dishware so it does not obstruct spray arm rotation. Spray arm nozzles are blocked. ▶ Clean the Spray arms → Page 34. Filters are soiled. ▶ Clean the filters. → "Cleaning filters", Page 33 Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly. → "Filter system", Page 33 2. Twist filters into place. Washing program selected too weak. ▶ Select a more intensive washing program. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
Troubleshooting
en-us
39
Issue
Cause and troubleshooting
Dishware is not dry.
Dishware removed too early or drying process not
yet ended.
1.
Wait until the program ends.
2.
Only remove dishware 30 minutes after the
program has ended.
Rinse aid used has a limited drying performance.
▶
Use a name-brand rinse aid.
Eco products may have limited effectiveness.
Silverware is not
dry.
Silverware not arranged properly in the silverware
basket or silverware drawer.
Droplets can form on the contact points of silver-
ware.
1.
Arrange silverware individually where possible.
→
Page 23
2.
Avoid points of contact.
Appliance interior
still wet after wash
cycle.
Not an error. Condensation drying creates water
droplets in the tub. This is normal. Moisture in the
air condenses on the inside walls of the appli-
ance, runs off, and is pumped out.
No action required.
Food remnants on
dishware.
Dishware was placed too close together or rack is
overfilled.
1.
Arrange dishware with sufficient space in be-
tween.
The spray jets must reach the surfaces of the
dishware.
2.
Avoid points of contact.
Spray arm rotation is blocked.
▶
Arrange dishware so it does not obstruct spray
arm rotation.
Spray arm nozzles are blocked.
▶
Clean the Spray arms
→
Page 34
.
Filters are soiled.
▶
Clean the filters.
→
"Cleaning filters", Page 33
Filters are inserted incorrectly and/or not en-
gaged.
1.
Insert the filters properly.
→
"Filter system", Page 33
2.
Twist filters into place.
Washing program selected too weak.
▶
Select a more intensive washing program.