Bosch SPE53B52UC Use and Care Manual 1 - Page 19
Rinse aid system
View all Bosch SPE53B52UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Rinse aid system 9 Rinse aid system Rinse aid system You can use the rinse aid system and rinse aid to get dishware and glasses rinsed perfectly without spots. 9.1 Rinse aid For optimum drying results, use rinse aid. Only use rinse aid intended for household dishwashers. Adding rinse aid If the rinse aid refill indicator lights up, fill the dispenser with rinse aid. Only use rinse aid intended for household dishwashers. 1. Press the catch on the lid of the dispenser for rinse aid and lift . 2 1 2. Add rinse aid up to the max mark. max 3. If rinse aid spills out, remove it from the tub. Rinse aid system en-us Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close the lid of the dispenser for rinse aid. a The lid clicks into position. 9.2 Setting the amount of rinse aid If there are streaks or water spots on dishware, change the amount of rinse aid. 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows . 3. Press repeatedly un- til the display shows the value set at the factory r04. 4. Press repeatedly until the right amount of rinse aid has been set. - A low setting adds less rinse aid during the wash cycle and reduces streaking on dishware. - A higher setting adds more rinse aid during the wash cycle, reduces water spots and improves the drying result. 5. To save the settings, press for 3 seconds. 9.3 Switching the rinse aid system off If you choose not to use rinse aid, you can turn the rinse aid system off. Tip: Rinse aid within a combination detergent has limited effectiveness. You will generally get better results using a separate rinse aid. 1. Press . 19