Bosch SPE53B52UC Use and Care Manual 1 - Page 43

Troubleshooting en-us Issue Cause and troubleshooting Detergent residue is Spray arms were blocked by dishware so deter- present in the deter- gent was not rinsed out. gent dispenser or ▶ Check that the spray arms are not blocked and the tab collecting can rotate freely. tray. Detergent dispenser was damp when detergent was added. ▶ Only add detergent to the detergent dispenser when dry. Excessive formation Hand soap got in the rinse aid dispenser. of foam occurs. ▶ Immediately add rinse aid to the dispenser. → "Adding rinse aid", Page 19 Rinse aid has been spilled. ▶ Remove the rinse aid with a cloth. Detergent or machine care product used causes excessive foaming. ▶ Change the brand of detergent. Connection to home WLAN on router is not active. network is not es- ▶ Check the wireless network connection of your tablished. router. WLAN display is flashing. Connection to home network is not available. ▶ Activate the wireless network connection on your router. Home Connect can- Home Connect set incorrectly. not be implemented ▶ Please consult the documents supplied for correctly. Home Connect. There is a technical error. ▶ Please consult the information on support in the documents supplied for Home Connect. Refill indicator for rinse aid lights up. No rinse aid. 1. Add Rinse aid → Page 19. 2. Set the amount of rinse aid to be dispensed. → "Setting the amount of rinse aid", Page 19 Refill indicator for rinse aid does not light up. Display flashes. Rinse aid system is switched off. ▶ Set the amount of rinse aid. Appliance door is not closed properly. ▶ Close the appliance door. ‒ Arrange the dishware so that no parts project beyond the rack and prevent the appliance door from closing properly. 43