Bose Aviation Headset Series II Owner's guide - Page 11
Headset cable relocation
View all Bose Aviation Headset Series II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Using the Bose® Aviation Headset 4. Plug the mic cable into the headband arm. You may want to use the adjustment screw to tighten the tension of the clip on the boom mic. The adjustment screw is on the flat end of the clip. Use a 3⁄32 in. hex wrench to tighten it. Do not over-tighten. Experience in using the headset helps establish your sense of how it should sound. If you notice a problem, refer to "In Case of Difficulty" (page 20). If problems persist, contact the Bose Aviation Headset Service Department to arrange for service (page 23). Headset cable relocation 1 2 3 4 11
11
4.
Plug the mic cable into the headband arm.
You may want to use the adjustment screw to tighten the tension of the
clip on the boom mic. The adjustment screw is on the flat end of the
clip. Use a
3
⁄
32
in. hex wrench to tighten it. Do not over-tighten.
Experience in using the headset helps establish your sense of how it
should sound. If you notice a problem, refer to “In Case of Difficulty”
(page 20). If problems persist, contact the Bose Aviation Headset
Service Department to arrange for service (page 23).
Using the Bose
®
Aviation Headset
1
2
3
4
Headset cable relocation