Bose Lifestyle 600 English Owners Guide - Page 31

T R O U B L E S H O O T I N G Symptom Problems related to CEC A connected ­device switches on its own No sound from the system Cannot complete ­network setup Cannot complete ­SoundTouch® setup Acoustimass® wireless bass ­module status LED is a solid amber (dim) Bass is too heavy or low Solution If the console is connected to your TV's HDMI ARC connector, make sure that Consumer Electronics Control (CEC) is enabled in your TV system menu. Your TV may refer to CEC by a different name. For more information, refer to your TV owner's guide or press the button on the remote control and select CEC Settings from the UNIFY® menu (see page 15). Press the button on the remote control and select Alternate On from the CEC Settings UNIFY® menu item (see page 15). • Increase the volume. • Press the Mute button on the remote control to make sure the system is not muted. • Make sure you have selected the correct source. • Cycle through and test different sources. • Make sure that the HDMI™ cable is inserted into a connector on your TV labeled ARC or Audio Return Channel. If your TV does not have an HDMI ARC connector, use a secondary audio cable in addition to the HDMI cable. • If using a secondary audio cable, insert the cable into a connector on your TV labeled Output or OUT. • Unplug the power cord for the console, wait 30 seconds and plug it firmly into a live AC (mains) outlet. • Select the correct network name and enter password (case sensitive). • Connect to the network using an Ethernet cable. • Restart your modem and router. • Connect the mobile device and the system to the same ­ Wi-Fi network. • If you have already added your system to your Wi-Fi network, ­select SYSTEM ALREADY ON NETWORK when prompted in the app. • Enable Wi-Fi on the mobile device you are ­using for setup. • Test your internet connection. • Restart your mobile device. • Restart your modem and router. • Uninstall the app, reinstall the app, reset the system and restart setup. • Follow the on-screen troubleshooting prompts. • Press the button on the control console or your remote and select Speaker Management to rerun setup (see page 15). • Connect the bass module using a 3.5 mm stereo c­able (see page 43). • Unplug the power cord for the Acoustimass, wait 30 seconds and plug it firmly into a live AC (mains) outlet. • Adjust the bass setting of the system (see page 19). • Run ADAPTiQ® audio calibration (see page 16). • Move the bass module away from nearby walls and corners. ENGLISH - 31