Bose Lifestyle 600 English Owners Guide - Page 40

Identifying switch settings on wireless ­receivers, Connecting the rear speakers

Get Bose Lifestyle 600 PDF manuals and user guides View all Bose Lifestyle 600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

A P P E N D I X A : I N S TA L L AT I O N R E F E R E N C E Identifying switch settings on wireless ­receivers Your rear speakers connect to wireless receivers to communicate with the console. The receivers come preset to a left and right channel out of the box. You can use the switch on the front of the receiver to adjust the channel settings. 1. Confirm that the switch on one wireless receiver is set to L (left). 2. Confirm that the switch on the other wireless receiver is set to R (right). Note: Make sure that one wireless receiver is always set to L (left) and the other is set to R (right). Connecting the rear speakers 1. Connect the AC-2 adapters to the bare ends of the speaker wire. See "­ Connecting an AC-2 adapter" on page 36. 2. Insert the adapter into the back of your speaker. 3. Insert the other end of the two-pin cable into your wireless receiver. You hear or feel a click. 4. Repeat steps 1 - 3 to connect your other speaker. 40 - ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
40 - ENGLISH
Identifying switch settings on wireless
receivers
Your rear speakers connect to wireless receivers to communicate with the console. The
receivers come preset to a left and right channel out of the box. You can use the switch
on the front of the receiver to adjust the channel settings.
1.
Confirm that the switch on one wireless receiver is set to
L
(left).
2.
Confirm that the switch on the other wireless receiver is set to
R
(right).
Note:
Make sure that one wireless receiver is always set to
L
(left) and the other is set
to
R
(right).
Connecting the rear speakers
1.
Connect the AC-2 adapters to the bare ends of the speaker wire. See “Connecting an
AC-2 adapter” on page 36.
2.
Insert the adapter into the back of your speaker.
3.
Insert the other end of the two-pin cable into your wireless receiver.
You hear or feel a click.
4.
Repeat steps 1 – 3 to connect your other speaker.
APPENDIX A: INSTALLATION REFERENCE