Bose Solo 15 Series II TV Sound Owner s Guide - Page 10
Using the System
View all Bose Solo 15 Series II TV Sound manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Using the System Programming the universal remote You can program the universal remote to control your source, such as a TV, DVD/Blu-ray Disc™ player, cable/satellite box, game system or DVR, by entering the code for your source's brand. There may be several codes for your source. You may need to perform this procedure multiple times to locate the correct code. Locate your source's code 1. Power on your source. 2. Locate the code for your source's brand in the Universal Remote Device Codes book (provided). Enter your source's code 1. On the remote control, press and hold the appropriate source button until all six source buttons glow, then release. For example, to program your TV, press and hold until all six source buttons glow, then release. The appropriate source button continues to glow. 2. On the number keypad, enter the code for your source's brand and press + on the volume button. Test your source's code 1. Test your source for basic functions. Follow the instructions for your source: • TV: press the channel buttons. Press . The settings menu appears. Press and to navigate. • Cable/satellite box: press . The programming guide appears. Press and to navigate. • DVD or Blu-ray Disc™ player: press . The settings menu appears. Press and to navigate. • Game system: press and to navigate through your menu. 2. Based on your source's response to basic functions: • Remote responds accurately: press programming and save your settings. to exit • Remote does not respond or does not respond accurately: -- If your source button glows: press + on the volume button to move to the next code. Repeat steps 1-2 in "Test your source's code". You may need to repeat this procedure 30 or more times. If all six buttons blink three times, you have cycled through all codes for your source. -- If your source button is off: your remote exited programming mode. Repeat steps 1-2 in "Enter your source's code" and steps 1-2 in "Test your source's code". Tip: After you exit programming mode, press the appropriate source button to use your source. Note: Your source may not be compatible with universal remote controls. Refer to your source's owner's guide for more information. Customizing the power button You can customize (power button) on your remote to power on/off your system, TV and cable/satellite box simultaneously. 1. Program your remote to control your TV and cable/satellite box (see "Programming the universal remote"). 2. Press seconds. and simultaneously and hold for ten Both buttons flash three times. Resyncing your cable/satellite box and TV After customizing the power button, your cable/satellite box and TV may become out of sync and not power on/off simultaneously. Use the following steps to resync the system. 1. Press the source button for the source that is out of sync. 2. Press to power on/off the source. 3. Press . Your sources power on/off simultaneously. Switching between sources You can switch from one source to another by pressing the appropriate source button on the remote. For information on connecting to a paired Bluetooth® device, see page 13. Note: Before you begin, ensure you have correctly programmed your sources. 1. Press the button for the source you want to control. The source button glows. 2. Press . The source powers on. 3. Press and select the correct input on your TV. Function buttons The red, green, yellow and blue buttons on the remote control correspond with the color-coded function buttons on your cable/ satellite box or teletext functions. • Cable/satellite box functions: refer to your cable/satellite box's owner's guide. • Teletext functions: correspond with color-coded page numbers, headings or shortcuts on a teletext display. 10 - English