Bose Solo 15 Series II TV Sound Owner s Guide - Page 8
Placing your TV on the system, Turning off your TV speakers, Powering on the system
View all Bose Solo 15 Series II TV Sound manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Setting up the System Placing your TV on the system Lift your TV and place it on top of the system. Follow these guidelines: • The Bose Solo 15/10 series II system is designed to fit under TVs that weigh no more than 75 lbs (34 kg) and have bases no wider than 24" (61 cm), and no deeper than 12.25" (31 cm). • The base of your TV should be centered on the top of the system and must not hang over any of its edges. • If the TV base is too large to fit on top of the system, place the sound system in another location such as on an open shelf under the TV, but keep it close to your TV so the audio cable will reach. You can also mount your TV on the wall above the system. CAUTIONS: • DO NOT place a CRT type TV on this system. It is not designed for use with this type of TV. • Allowing the base of your TV to hang over any edge of this speaker system increases the risk of the TV tipping, which may result in injury. • If your TV comes with an anti-tip device, install it according to the manufacturer's instructions and adjust the tether as instructed after placing the TV on top of the system. Installing an anti-tip device is recommended when using a TV with this product. If your TV did not come with an anti-tip device, you can get one from most retail TV suppliers. To avoid wireless interference: • Keep other wireless equipment away from the system. • Place the system outside of and away from metal cabinets, other audio/video components and direct heat sources. Sample system placement Turning off your TV speakers To avoid hearing distorted sound, turn off your TV speakers. Refer to your TV's owner's guide for more information. Powering on the system 1. Power on your TV. 2. If you are using a cable/satellite box or other secondary source, power on the source. 3. Press the Power button ( ) on the remote control. The status indicator glows green. Status indicator 4. Check if sound is coming from the system. Note: If you do not hear sound coming from the system, see "Troubleshooting" on page 18. Confirming your TV speakers are off 1. Press the Mute button ( ) on the remote. 2. Check that no sound is coming from your TV. Note: If you hear sound coming from your TV, see "Troubleshooting" on page 18. 8 - English