Bose Wave Radio IV Owner s guide - Page 14

Care and Maintenance

Page 14 highlights

Care and Maintenance Troubleshooting Problem System does not function No sound Poor sound quality Remote control is ­inconsistent or does not work AM reception is weak FM reception is weak What to do • Connect the system to AC (mains) power. • Unplug the power cord from the AC wall outlet for 10 seconds and then reconnect it; this resets the system. • Tap the touch pad on the top of the system to see if the system powers on (see page 8). • Increase the volume. • Disconnect headphones from the system (connecting headphones mutes the speakers). • If the bass is too heavy or low, adjust the bass level of the system using the setup menu (see page 13). • If listening to an external AUX source, use a stereo cable and that it is fully inserted. • Operate the remote control closer to the system. • Check that the remote control battery is installed with positive (+) polarity facing up. • Replace the remote control battery. • Check for interference from fluorescent room lighting, sunlight, or dust or dirt on lens. • Try the system in a different location. • Turn the system slightly one way and then the other to change the direction of the internal AM antenna. • Move the unit farther from a TV, refrigerator, halogen lamps, dimmer switches, or other electronic ­equipment that generates electrical noise. • If neither suggestion works, you may be in an area of weak AM signal coverage. • Extend the power cord as much as possible. The power cord acts as an FM antenna. See page 9. • See "Using an external antenna" on page 12. 14 - English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

14 - English
Care and Maintenance
Troubleshooting
Problem
What to do
System does not function
• Connect the system to AC (mains) power.
• Unplug the power cord from the AC wall outlet for 10 seconds and then reconnect it; this resets
the system.
• Tap the touch pad on the top of the system to see if the system powers on (see page 8).
No sound
• Increase the volume.
• Disconnect headphones from the system (connecting headphones mutes the speakers).
Poor sound quality
• If the bass is too heavy or low, adjust the bass level of the system using the setup menu (see page 13).
• If listening to an external AUX source, use a stereo cable and that it is fully inserted.
Remote control is
inconsistent or does
not work
• Operate the remote control closer to the system.
• Check that the remote control battery is installed with positive (+) polarity facing up.
• Replace the remote control battery.
• Check for interference from fluorescent room lighting, sunlight, or dust or dirt on lens.
• Try the system in a different location.
AM reception is weak
• Turn the system slightly one way and then the other to change the direction of the internal AM antenna.
• Move the unit farther from a TV, refrigerator, halogen lamps, dimmer switches, or other electronic
equipment that generates electrical noise.
• If neither suggestion works, you may be in an area of weak AM signal coverage.
FM reception is weak
• Extend the power cord as much as possible. The power cord acts as an FM antenna. See page 9.
• See “Using an external antenna” on page 12.