Bose Wave Radio IV Owner s guide - Page 8

Using the System Touch pad The system has a touch-sensitive control pad on the top panel. Momentarily placing your hand on the touch pad can power on or off the system, snooze a sounding alarm, and reset it for the next day (page 13). ® Notes: • Press-and-hold operations require holding the button down for about one second. • Pressing or automatically powers on the system to the selected source. Reading the display Source indicators: CD, FM, AM, or AUX Play mode Clock Alarm status Source or system-related information Powering on or off the system • Press on the remote control or ® • Touch the touch pad. The last source you were listening to is active. Alternatively: Press any source button to power on the system to that source. Notes: • Selecting AUX does not power on a device connected to AUX IN (such as a media player). Power on the device first. • After 24 hours of no button presses, the system switches to standby (off). If the 20-minute system standby timer (page 13) is enabled, the system switches to standby if no audio is played and no buttons are pressed for 20 minutes. Controlling the volume Press and hold or to adjust the volume level. VOLUME - 0 (silent) to 99 (loud) appears on the display to indicate the level. Press to mute the system. Press again, or press to unmute. While muted, you can press unmuting the system. to lower the volume before Note: When the system is off, the volume can only be adjusted between 10 and 75. Setting the sleep timer Press SLEEP to set the system to shut off after a selected period of time. • After pressing SLEEP, SLEEP - 30 MIN (or your last setting) ­appears on the display and the sleep timer begins counting down. If the system is off, press SLEEP to power on and immediately set the sleep time. The last source selected will start playing as the sleep timer counts down. • While the SLEEP setting is displayed, press SLEEP again to set the sleep timer to 10-90 minutes (in 10-minute increments) or OFF. Note: If more than 10 seconds elapses between button presses, the system automatically exits the sleep timer setup mode. • To review the remaining sleep time, press SLEEP. • To cancel the sleep timer, press and release SLEEP until SLEEP - OFF appears on the display. 8 - English