Brother International BAS-311E Network Users Manual - English - Page 90
DIP switches, Panel DIP switch functions
View all Brother International BAS-311E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 6 Power supply and electrical parts adjustment 5. DIP switches Note: When changing DIP switch setting the power must be off. Panel DIP switch functions s DIP switch A SW No. When ON A -1 After sewing is complete, the work clamp is raised by the operator and does not rise automatically. • Various setting combinations for DIP switches No.2, No.3 and No.4 can be used to change the way the work clamp is raised and lowered. • For pneumatic work clamps, the operation mode can be changed using the two-stage work clamp switch. SW A-2 SW A-3 SW A-4 Type Function of work clamp pedal ------ ------ ------ Solenoid Work clamp and presser foot rise and lower simultaneously. ON ------ ------ Solenoid Only work clamp rises and lowers; presser foot lowers when starting switch is pressed. ------ ON ------ Pneumatic For split-type work clamp the left/right order changes alternately. Pneumatic Only work clamp rises and lowers; presser foot lowers ON ON ------ Pneumatic when starting switch is pressed. ------ ------ ON Pneumatic ON Pneumatic Work clamp and presser foot rise and lower simultaneously. Right work clamp, left work clamp and presser foot lower in this order. ON ------ ON Pneumatic They rise in the reverse order. Left work clamp, right work clamp and presser foot lower in this order. ------ ON ON Pneumatic They rise in the reverse order. Both left and right work clamps, and presser foot lower in this order. ON ON ON Pneumatic They rise in the reverse order. 82 BAS-311E.311EL.326E.326EL