Brother International BAS-326G PS Basic Instruction Manual - English - Page 37
Setting the height of the intermittent presser foot, Intermittent presser foot height
View all Brother International BAS-326G PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5. USING THE OPERATION PANEL (BASIC OPERATIONS) 5-7. Setting the height of the intermittent presser foot You can use the operation panel to change the setting value for the intermittent presser foot height. 1 All indicators switch off Press the THREAD/CLAMP key. The sewing machine will switch to threading mode. • " 1" will appear in the PROGRAM No. display and the intermittent presser foot (1) will drop. THREAD/CLAMP indicator illuminates MENU indicator switches off 4445Q 2158B 2 Press the key. The sewing machine will switch to intermittent presser foot height setting mode. • " 4" will appear in the PROGRAM No. display and the intermittent presser foot (1) will rise to the setting value that appears in the menu display. (Intermittent presser foot height setting: 0.0 − 10.0) Press the or key to set the intermittent presser foot height. • The intermittent presser foot (1) will be raised or lowered to the height of the new value that has been set. NOTE: After making the setting, be sure to turn the pulley once by hand and check that the intermittent presser foot (1) does not touch the needle bar. 5225Q " 1" Threading mode ↑ ↓ " 4" Intermittent presser foot height setting mode 4016M 3 Ending setting mode Press the THREAD/CLAMP key. • The setting values will be memorized. • The intermittent presser foot (1) will return to the status that it was at before the sewing machine was switched to setting mode. THREAD/CLAMP indicator switches off Intermittent presser foot operation During standby When lowered While sewing 1 Intermittent presser foot lift amount 2 Intermittent presser foot height The settings can be made by the above operations. However, if the intermittent presser foot height is set to a smaller setting than the intermittent presser foot stroke, the intermittent presser foot will not drop in order to prevent it from coming into contact with the needle plate. (Refer to page 63 of the instruction manual CD.) 3 Intermittent stroke Refer to "10-14. Changing the intermittent stroke" in the instruction manual CD when making the adjustment. 1899B BAS-326G PS 29