Brother International BES-961BC Instruction Manual - English
Brother International BES-961BC Manual
View all Brother International BES-961BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International BES-961BC manual content summary:
- Brother International BES-961BC | Instruction Manual - English - Page 1
BES-961BC BES-1261BC INSTRUCTION MANUAL Please read this manual before using the machine. Please keep this manual within easy reach for quick reference. NINE NEEDLE SIX HEAD ELECTRONIC EMBROIDERY MACHINE TWELVE NEEDLE SIX HEAD ELECTRONIC EMBROIDERY MACHINE - Brother International BES-961BC | Instruction Manual - English - Page 2
companies or persons is illegal. The use of such materials without the permission of their owners may result in criminal or civil liability. • This manual may be subsequently modified without prior notice. • Brother Industries, Ltd. shall assume no responsibility for any consequences of using this - Brother International BES-961BC | Instruction Manual - English - Page 3
Thank you very much for buying a BROTHER sewing machine. Before using your new machine, please read the safety instructions below and the explanations given in the instruction manual. With industrial sewing machines, it is normal to carry out work while positioned directly in front of moving parts - Brother International BES-961BC | Instruction Manual - English - Page 4
in machine operation, or if abnormal noises or smells are noticed, immediately turn off the power switch. Then contact your nearest Brother dealer or a qualified technician. If the machine develops a problem, contact your nearest Brother dealer or a qualified technician. 2 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 5
safety precautions. Use only the proper replacement parts as specified by Brother. If any safety devices have been removed, be absolutely sure to check that they operate correctly before using the machine. Any problems in machine operation which result from unauthorized modifications to the machine - Brother International BES-961BC | Instruction Manual - English - Page 6
warning labels appear on the sewing machine. Please follow the instructions on the labels at all times when using the machine. If the labels have been removed or are difficult to read, please contact your nearest Brother dealer. 1 Safety devices: Finger guard, Belt cover, etc. CAUTION Moving - Brother International BES-961BC | Instruction Manual - English - Page 7
Belt cover Finger guard sBES-961BC BES-961BC • BES-1261BC 5 - Brother International BES-961BC | Instruction Manual - English - Page 8
Before Starting Operation Do not force open the shutter for direct contact with the magnetic area. Do not bring disks near magnetic matters such as magnetic screwdriver. Do not store floppy disks in an extremely high or low ambient temperature. Do not use floppy disks under high humidity. Do - Brother International BES-961BC | Instruction Manual - English - Page 9
Protecting data in floppy disks Write-protection is available for a floppy disk to prevent undesired data deletion. A write-protected disk is read-only. It is recommended to provide write-protection for disks which contain important data. To do so, slide the write-protect notch to open the slot as - Brother International BES-961BC | Instruction Manual - English - Page 10
. Check the model before using the machine. The display is BES-961BC. Configuration of this manual This manual consists of the following chapters: Chapter 1 Preparation of Embroidery Machine This Chapter describes the specifications, installation and preparatory procedures of starting up the machine - Brother International BES-961BC | Instruction Manual - English - Page 11
Chapter 9 List of Error Messages Provides information on error codes and action to be taken. Chapter 10 Troubleshooting Provides troubleshooting for the machine. Connection and Installation of Optional Equipment Describes connections between the machine/computer and optional equipment available. - Brother International BES-961BC | Instruction Manual - English - Page 12
Screen Composition Initial Screen Starting Sewing START Operation (→ page 72) Selection of Embroidery data (→ page 61) Canceling of Sewing STOP Thread trimming Setting of Needle Bars (→ page 92) Hoop Retract Area Check Editing of Enbroidering Data (→ page 77) ↓ ↓ - Brother International BES-961BC | Instruction Manual - English - Page 13
Setting of thread breakage sensor (→page 93) ↓ ↓ Setting of Machine (→page 96) ↓ ↓ BES-961BC • BES-1261BC 11 - Brother International BES-961BC | Instruction Manual - English - Page 14
Contents SAFTY INSTRUCTIONS 1 Before Starting Operation 6 Procedure of Reading This Manual 8 Screen Composition 10 Chapter 1 Preparation of Embroidery Machine 1. Specifications 18 2. Names of Machine Components 19 3. Installation 21 3-1. Transportation of Machine 21 3-2. Installation of - Brother International BES-961BC | Instruction Manual - English - Page 15
Reading from Memory 64 Registration of Embroidery Data from BE-100 65 Deletion of Embroidery Data from Machine Memory 66 Modification of Embroidery Data Name 68 Sewing Operation 72 Before Starting Sewing 72 Starting Sewing Operation 72 Feedhold and Cancellation of Sewing 73 Step Forward and - Brother International BES-961BC | Instruction Manual - English - Page 16
Speed of Each Speed Range 98 Setting of Mending 99 Thread Trimming Length 101 Thread Withdrawal Feed Length 101 Inching ...102 Sewing Area ...103 Registration of Sewing Start Position 103 Hoop Retract Point 104 Hoop Automatic Retract 104 Movement to Registered Sewing Start Point 105 Setting - Brother International BES-961BC | Instruction Manual - English - Page 17
131 2-1. Head ...131 3. Greasing 133 3-1. Head ...133 3-2. Feed Guide Section 137 Chapter 8 Standard Adjustment 1. Adjusting Needle Bar Height 140 Tention 150 Chapter 9 List of Error Message Chapter 10 Troubleshooting Mechanical Section 156 Electrical Section 158 Connection and Installation of - Brother International BES-961BC | Instruction Manual - English - Page 18
16 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 19
Chapter 1 Preparation of Embroidery Machine - Brother International BES-961BC | Instruction Manual - English - Page 20
Storage medium Thread trimming Needle thread breakage Power supply Weight Dimensions Options 9 needle embroidery machine head 12 needle embroidery machine head (six-head type) (six-head type) Pattern embroidery Maximum 1000 spm 450 (V) x 400 (H) mm (border frame area) 430 (V) x 300 (H) mm - Brother International BES-961BC | Instruction Manual - English - Page 21
Chapter 1 Preparation of Embroidery Machine 2. Names of Machine Components s BES-961BC Thread tension dial Operation panel Pulley Start switch Emergency stop switch Thread tension switch Thread guide B Thread guide A Thread guide C Cotton stand Control box Power switch F table Start switch - Brother International BES-961BC | Instruction Manual - English - Page 22
round arm set R (6) • Tubular round arm set L (6) Others F table assembly Optional Accessories • Holder base 30 x 43 (6) Other embroidery hoops in different sizes • Sash frame assembly * Other Tajima embroidery hoops that can be used with BAS-412A and 416A • Cap frame (6) Cap frame drive assembly - Brother International BES-961BC | Instruction Manual - English - Page 23
away from a highfrequency welding machine or other machines that may generate a strong electric noise. Failure to do so may cause the embroidery machine to malfunction. Establish grounding as designated. Improper grounding may result in an electric shock. * After installation is completed, get the - Brother International BES-961BC | Instruction Manual - English - Page 24
Chapter 1 Preparation of Embroidery Machine s When using a crane Rope L-shaped steel Rectangular bar Place two rectangular bars on the four L-shaped steels on the bottom of the machine steel - Brother International BES-961BC | Instruction Manual - English - Page 25
Installation of Machine r q e w Chapter 1 Preparation of Embroidery Machine 1. Place the attached cushion sheets w and leveling plates will be stable. Note) If the floor is not strong enough, the embroidery machine may be rocked during operation. In such a case, it is recommended that a secure base - Brother International BES-961BC | Instruction Manual - English - Page 26
Chapter 1 Preparation of Embroidery Machine 3-3 Preparation of Needle Bar Case s BES-961BC w q y u t e i r 1. Loosen the bolt q, and move the needle case w to the left. 2. Press the change bracket collar r against - Brother International BES-961BC | Instruction Manual - English - Page 27
s BES-1261BC Chapter 1 Preparation of Embroidery Machine Bridge r Connecting shaft Fixing bracket q t Fixing bracket B o q o u y i e w 1. Remove 3 pieces of fixing screw q,loosen 2 pieces of screw w and remove the color change cover e. 2. Remove the - Brother International BES-961BC | Instruction Manual - English - Page 28
Chapter 1 Preparation of Embroidery Machine 3-4 Mounting of Table s Mounting of F table q r q w q w e e w 1. Tentatively mount the F table guides U q and L w on both sides of the legs using two bolts each. 2. Tentatively mount there F table supports F e on the leg front using two bolts each. 3. - Brother International BES-961BC | Instruction Manual - English - Page 29
Chapter 1 Preparation of Embroidery Machine o i Pin t y u q Lower by 1 mm e 4. Mount four thumb bolts i each y, and L u into the cover o on the leg. Adjust the height of the F table guide U q and the F table support F e so that the table top surface will become 1 mm lower than the bed top surface - Brother International BES-961BC | Instruction Manual - English - Page 30
Chapter 1 Preparation of Embroidery Machine e r i w u y e w t 7. Dismount the F table R t, M (2 pcs.) y, and L u once, and lower the F table support F e. Then, place the F table R t, M (2 pcs.) y, and L u on the F table guide L w bending section. Fix the F table support F e at this height and - Brother International BES-961BC | Instruction Manual - English - Page 31
Chapter 1 Preparation of Embroidery Machine u y o !0 t !0 9. Fix the legs and the table using the F table stays A (3 pcs.) o and B (2 pcs.) !0 while the F table R t, M (2 pcs.) y, and L u are fixed at the upper position. * - Brother International BES-961BC | Instruction Manual - English - Page 32
of Embroidery Machine 3-5 Mounting of Cotton Stand s BES-961BC Thread guide C Thread guide B Thread guide A Front e r w t q 1. Attach four thread guide support bars w to the cotton stand assembly q, while fitting into the four holes. 2. Mount the thread guide assembly e on the thread guide support - Brother International BES-961BC | Instruction Manual - English - Page 33
e Chapter 1 Preparation of Embroidery Machine Thread guide C Thread guide B Thread guide A Front r w t q 1. Attach four thread guide support bars w to the cotton stand assembly q, while fitting into the four holes. 2. Mount the thread guide assembly e on the thread guide support bars w using the - Brother International BES-961BC | Instruction Manual - English - Page 34
supply one or two drops of oil to two sections of the needle bar. (See the left figure.) Note) • Use the Brother's specified embroidery machine oil (Nisseki Embroidery Lube No. 10 or the equivalent). • Supplying an excessive amount of oil will cause dripping onto the material. BES-961BC BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 35
Chapter 1 Preparation of Embroidery Machine 3-7 Grounding Note) • When connecting the power supply, make sure to connect it to the grounding cable (with green and yellow stripes). • When plugging in the outlet, use a plug suited to the outlet. Grounding cable BES-961BC • BES-1261BC 33 - Brother International BES-961BC | Instruction Manual - English - Page 36
Chapter 1 Preparation of Embroidery Machine 4. Preparation for Embroidering CAUTION Turn No.2,5,8 No.1,4,7 7 8 1. Pass the upper thread from the cotton stand through the hole of the thread guide right above each cotton stand bar from the lower side. 2. Pass the thread through the upper hole of the - Brother International BES-961BC | Instruction Manual - English - Page 37
Chapter 1 Preparation of Embroidery Machine 4. Pass the thread through the hole of the upper thread guide (U), wind it into the tension disk clockwise once, and place it on the spring. 5. Pass the thread through each hole of the upper thread guide (U) and the thread guide (C). 6. After passing the - Brother International BES-961BC | Instruction Manual - English - Page 38
Chapter 1 Preparation of Embroidery Machine 3. Pass the thread through the upper hole of the it around the thread breakage pulley twice. 4. Pass the thread through the hole of the upper thread guide (U), wind it into the tension disk clockwise once, and place it on the spring. 5. Pass the thread - Brother International BES-961BC | Instruction Manual - English - Page 39
Chapter 1 Preparation of Embroidery Machine 4-2 Replacement of Bobbin Note) Remove dust, lint and oil from the bobbin case before replacement. s Removing bobbin case w 1. Open the rotary hook cover B q. 2. Hold - Brother International BES-961BC | Instruction Manual - English - Page 40
Chapter 1 Preparation of Embroidery Machine 4-3 Replacing and Selecting Needle s Removing needle Loosen the set screw q and remove the needle q. q w * Relationship between materials and needles Material Needle Needle thickness Denim - Brother International BES-961BC | Instruction Manual - English - Page 41
Chapter 1 Preparation of Embroidery Machine 4-4 Attachment of Embroidery Hoop and Frame s Tubular square hoop r e w q y u t q 1. Insert the fixing pins of the tubular round arms R q and L w into the notches of the X-axis feed frame e. Slide - Brother International BES-961BC | Instruction Manual - English - Page 42
Chapter 1 Preparation of Embroidery Machine • By changing the tubular round arm mounting width, various sizes can be set. Note) Change the width, referring to the pin position. 360mm 400mm - Brother International BES-961BC | Instruction Manual - English - Page 43
s Holder base (optional) r Chapter 1 Preparation of Embroidery Machine q w i y y e y r Felt Table t e t u 1mm 1mm Attaching the holder base frame front. [Adjustment] Loosen three bolts of the F table support F y and move it in the direction of the arrow for adjustment. BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 44
Chapter 1 Preparation of Embroidery Machine 6. Check that the clearance between the Y-axis cover u and the mounted holder base frames L e and R t is even when viewed from the right and left sides. [Adjustment] Loosen the right and left bolts of the F table guide U i and move it in the direction of - Brother International BES-961BC | Instruction Manual - English - Page 45
Chapter 1 Preparation of Embroidery Machine 3. When the mounting pitch of the holder base is 550 mm, mount the holder base vertically to the X-axis feed frame q and holder base frame C w using the thumb bolts r. r q r w BES-961BC • BES-1261BC 43 - Brother International BES-961BC | Instruction Manual - English - Page 46
Chapter 1 Preparation of Embroidery Machine s Sash frame (optional) w q r y t q e t y e e Attaching the sash frame 1. Set the table. (Refer to "3-4 Mounting of Table" (Page 26) for details.) 2. Mount two vertical sash frames q - Brother International BES-961BC | Instruction Manual - English - Page 47
Chapter 1 Preparation of Embroidery Machine 4-5 Bed Retract When embroidery within the maximum area by the right and left. Note) • The bed is secured by two bolts and supported at three places. • When loosening the bolts, support the bed by hand. 2. Lower the machine bed e slowly until it comes into - Brother International BES-961BC | Instruction Manual - English - Page 48
Chapter 1 Preparation of Embroidery Machine 4. Set the needle bar case at the needle bar No. of bed retract 1. Move the machine bed e little by little until it comes into contact with the bed support q. 2. Loosen two bolts w and insert the bed into the right and left directions, then tighten the - Brother International BES-961BC | Instruction Manual - English - Page 49
Chapter 1 Preparation of Embroidery Machine 4-6 Adjustment of Thread Tension s Adjustment of upper thread Adjust upper thread tension to 0.7~1.3N (70~130 gf) when the thread is pulled at the needle bar thread guide. 0.7~1.3N (70~130gf) Upper stitch width Upper thread s Adjustment of tension - Brother International BES-961BC | Instruction Manual - English - Page 50
Chapter 1 Preparation of Embroidery Machine 2. For adjusting the height, loosen the screw q and turn the tension spring bracket w. 3. For adjusting the tension spring force, insert a driver tip in the - Brother International BES-961BC | Instruction Manual - English - Page 51
Chapter 2 Embroidering Procedures After installation of machine start embroidering. This chapter explains about the operation panel on the machine as well as precautions for the actual embroidering process. - Brother International BES-961BC | Instruction Manual - English - Page 52
Chapter 2 Embroidering Procedures Functions of Operation Panel Operation Panel BES-961BC FLAT CAP HOOP START STOP ESC INS DEL END 123 . ABC DEF 456 G H I JKL MNO 789 PQRS TUV WXYZ 0 SPACE START Starts embroidering. Restarts after moving the carriage to embroidering start position by - Brother International BES-961BC | Instruction Manual - English - Page 53
is pressed again, the hoop returns to the previous position. Checks the embroidering area. Moves the hoop automatically into the embroidering area when the embroidery position is out of the area. ESC INS DEL END 123 . ABC DEF 456 G H I JKL MNO 789 PQRS TUV WXYZ 0 SPACE Used for selecting - Brother International BES-961BC | Instruction Manual - English - Page 54
Chapter 2 Embroidering Procedures FLAT CAP HOOP Selects the flat or cap hoop. This selection should be done before turning the power ON to the machine. Selection after turning the power ON may damage the hoop. Moves the hoop. Step-back or forward is available during suspension, by one stitch - Brother International BES-961BC | Instruction Manual - English - Page 55
Switches at Machine Heads BES-961BC Start button Chapter 2 Embroidering Procedures BES-1261BC Start button Emergency stop button s Emergency stop button Stops embroidering operation. "Emergency stopping" is displayed on the screen as soon as the machine stops. Refer to "Resetting Emergency Stop" - Brother International BES-961BC | Instruction Manual - English - Page 56
s THREAD SENSOR lamp When red light is on, thread breakage sensor is functioning. When the light is off, the sensor is not effective. When the embroidery machine stops due to thread breakage, the lamp flashes. s HEAD switch When it is set to ON, needle bar on the head moves for embroidering - Brother International BES-961BC | Instruction Manual - English - Page 57
of Preparation for Embroidering Turn on the machine power. (¡ page 56). w Retrieve the embroidery data (¡ page 57). "Chapter 3 Selection of Data and Embroidering" (¡ page 59) w Edit the retrieved embroidery data. "Chapter 4 Editing of Embroidering Data" (¡ page 77) Press on the operation - Brother International BES-961BC | Instruction Manual - English - Page 58
Chapter 2 Embroidering Procedures Turn on the Machine Power 1. Turn on the power to the machine. 2. A message is displayed on the LCD as soon as the power is turned ON. BES-961BC BES-1261BC 3. The alarm sounds three times. The needle bar and the presser foot move up. The hoop moves back to the zero - Brother International BES-961BC | Instruction Manual - English - Page 59
for data selection, input a numerical figure (1 ~ 9) which indicates each data name. Required embroidery data is selected and read. 3. Press key. Required embroidery data is selected and read. Selected embroidery data is read. Start Embroidering 1. Press to check the embroidering area. 2. Press - Brother International BES-961BC | Instruction Manual - English - Page 60
Chapter 2 Embroidering Procedures 58 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 61
Chapter 3 Selection of Data and Embroidering This Chapter describes how to select embroidery data in order to start embroidering. - Brother International BES-961BC | Instruction Manual - English - Page 62
-100 (→ Page 65) (These icons are displayed in the lower right of the screen.) Modification of data name (→ Page 68) Deletion of embroidery data (→ Page 66) Embroidering Operation Embroidering start (→ Page 72) Embroidering feedhold (→ Page 73) Embroidering cancel (→ Page 73) Step forward/step back - Brother International BES-961BC | Instruction Manual - English - Page 63
data to make a space. Data in a floppy disk Registration Data created by BE-100 Machine memory Sewing Reading Registration of Embroidery Data from Floppy Disk Register embroidery data from a floppy disk into the machine memory. s Types of data to be registered are as shown below. • DOS - Brother International BES-961BC | Instruction Manual - English - Page 64
disk, press the eject switch. 3. When it comes out, pull it straight. When the access lamp if ON, never press the eject switch. Otherwise, embroidery data in the floppy disk may be destroyed. Eject switch Access lamp Registration of Sewing Data into Machine Memory 1. Load a floppy disk with sewing - Brother International BES-961BC | Instruction Manual - English - Page 65
displayed screen No. of screens to be selected Data in floppy disk Icon indicating a kind of selected data displays a pattern name. Name of a selected embroidery pattern (It may be the same as a file name.) 6. Select data to register by pressing ten keys or Data is newly registered in the machine - Brother International BES-961BC | Instruction Manual - English - Page 66
to use for sewing can be selected from the machine memory. s A maximum 45 kinds or 480,000 stitches of embroidery data can be registered in the memory. 1. Press . Embroidery data registered in the memory is displayed. 2. Select a screen by pressing . Currently displayed screen No. of screens to - Brother International BES-961BC | Instruction Manual - English - Page 67
Data from BE-100 Connect the operation panel and the personal computer with BE-100 installed in order to register the embroidery data into the machine memory. 1. Connect the personal computer with BE-100 installed and the operation panel by means of the RS-232C cable. Personal - Brother International BES-961BC | Instruction Manual - English - Page 68
by pressing ten keys or press the key. The data is registered in the machine memory. , and then Deletion of Embroidery Data from Machine Memory Embroidery data can be deleted from the machine memory. 1. Press . A list of registered data is displayed. 2. Select a screen by pressing . Currently - Brother International BES-961BC | Instruction Manual - English - Page 69
Chapter 3 Selection of Data and Embroidering 4. Press DEL . Selected embroidery data is deleted from the memory. ɹɹɹɹ↓ When deleting embroidery data in the machine memory entirely: When deleting embroidery data registered in the machine memory entirely, turn ON the power to the machine while - Brother International BES-961BC | Instruction Manual - English - Page 70
can be modified. This example shows how to modify the data name "FLOWER" to "TEST003". s A maximum number of characters to use for an embroidery data name is 8. s The following kinds of characters can be used. s It is impossible to input a " . " or space. Alphabetical characters (A ~ Z) Numerical - Brother International BES-961BC | Instruction Manual - English - Page 71
, the name is displayed. Press the key once again. 5. Input a new data name by pressing ten keys. When modifying embroidery data names entirely 6. Pressing DEL deletes currently reversed characters. 7. Press 8 T U V twice. "T" is input. 8. Press 3 three times. D E F "E" is input. 9. Press - Brother International BES-961BC | Instruction Manual - English - Page 72
Chapter 3 Selection of Data and Embroidering 12. Press . When inputting the same character continuously, press the to move the cursor to the right. 13. Press 0 once. SPACE "0" is input. 14. Press 3 D E F once. "3" is input. 15. After inputting a data name, press . A data name is modified by - Brother International BES-961BC | Instruction Manual - English - Page 73
9. Press 6 M N O four times. "O" is input. Chapter 3 Selection of Data and Embroidering 10. Press . A data name is modified by the above procedures. BES-961BC • BES-1261BC 71 - Brother International BES-961BC | Instruction Manual - English - Page 74
is set on the machine, select [FLAT]. When a cap hoop is set, select [CAP]. FLAT CAP HOOP 2. Specify an embroidery hoop set on the machine, referring to "Embroidery Hoop" (→ Page 96). Starting Sewing Operation s For details of specifying a sewing start position, refer to "Registration of Sewing - Brother International BES-961BC | Instruction Manual - English - Page 75
Chapter 3 Selection of Data and Embroidering Feedhold and Cancellation of Sewing Feedhold 1. Press STOP . Sewing is interrupted. Cancellation 1. Press ESC while sewing is interrupted. When repetition of patterns is set, a pattern which is currently being sewn is canceled. When canceling all patterns - Brother International BES-961BC | Instruction Manual - English - Page 76
Chapter 3 Selection of Data and Embroidering Step Forward and Step-Back Stitches can be advanced (step forward) or retracted (step-back) without sewing. Step Forward/Step-Back Mode 1. Press when selecting either mode before starting sewing and press STOP when selecting a mode during sewing. Setting - Brother International BES-961BC | Instruction Manual - English - Page 77
Chapter 3 Selection of Data and Embroidering 4. The embroidery head advances (retracts) by a specified number of stitches. For Step Forward (Back) 1. Press . Stitches steps forward (back) by a specified amount. Resuming Sewing 1. Press START . Sewing is started. BES-961BC • BES-1261BC 75 - Brother International BES-961BC | Instruction Manual - English - Page 78
Chapter 3 Selection of Data and Embroidering 76 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 79
Chapter 4 Editing of Embroidering Data Pressing on the operation panel after reading embroidering data displays the em- broidering data editing screen. Simple op- eration by using embroidering data is avail- able on this screen. - Brother International BES-961BC | Instruction Manual - English - Page 80
Chapter 4 Editing of Embroidering Data What Can the Machine Do? Editing s Enlargement/reduction is executed ahead of rotation. When an embroidery pattern is so set to be rotated by 90˚ and then enlarged by 2 times in the X-axis direction, the X-axis enlargement is executed first and - Brother International BES-961BC | Instruction Manual - English - Page 81
Rotation A pattern can be rotated. Chapter 4 Editing of Embroidering Data ɹˠɹ s A maximum range of rotation is 1 ~ 359 degrees. s The rotating direction is counterclockwise. s Rotating angle can be set in either of the following. By using By using ten keys Angle can be specified in increments - Brother International BES-961BC | Instruction Manual - English - Page 82
Chapter 4 Editing of Embroidering Data Enlargement and Reduction A pattern can be enlarged or reduced. ɹˠɹ ˠ s The enlargement and reduction ratio is 50 ~ 200%. s The number of stitches does not change even by enlargement or reduction of a pattern. However, stitches may become too rough or - Brother International BES-961BC | Instruction Manual - English - Page 83
Chapter 4 Editing of Embroidering Data Enlargement/reduction at different ratios in the X/Y directions 3. Press twice. is reversed in black. 4. Input enlargement/reduction ratio in the X direction by pressing ten keys. 5. Press . is reversed in black. 6. Input enlargement/reduction ratio in the Y - Brother International BES-961BC | Instruction Manual - English - Page 84
Chapter 4 Editing of Embroidering Data Mirror A pattern can be reversed as if it is reflected in the mirror. ɹˠɹ Right/left mirror patter ɹˠɹ Up/down mirror patter ɹˠɹ Zero point-symmetric mirror patter s Up/down mirror pattern → Right/left mirror pattern → Zero point-symmetric mirror pattern - Brother International BES-961BC | Instruction Manual - English - Page 85
Chapter 4 Editing of Embroidering Data Right/Left Mirror Pattern 3. Keep pressing until is displayed. 4. Press END . The initial screen is displayed again. Up/Down Mirror Pattern 3. Keep pressing until is displayed. 4. Press END . The initial screen is displayed again. Zero Point-Symmetric Mirror - Brother International BES-961BC | Instruction Manual - English - Page 86
Chapter 4 Editing of Embroidering Data Repetition A pattern is repeatedly copied as many times as specified. ˠ s The number of repetitions is 1 ~ 99 in both the vertical (row) and horizontal (line) directions. s There are the following eight directions of repetitions. Horizontal direction from - Brother International BES-961BC | Instruction Manual - English - Page 87
4. Press . Chapter 4 Editing of Embroidering Data 5. Input intervals between repetitions by pressing ten keys. The vertical and horizontal directions are changed over by pressing . Press for setting a distance between the centers of each pattern. For setting a distance between the outer hoops - Brother International BES-961BC | Instruction Manual - English - Page 88
Chapter 4 Editing of Embroidering Data Other Editing Setting of other functions related to editing is available. The following types of setting is available. 0 stitch deletion For deleting stitches at the same point without stepping forward or back. This function is previously set to (for not - Brother International BES-961BC | Instruction Manual - English - Page 89
Thread Trimming Feed Number 3. Select this function by pressing . Chapter 4 Editing of Embroidering Data 4. Select the number of feeds by pressing . 5. Press END after setting is finished. Swing Width Correction Correction values within 1 ~ 10 can be input. However, excessively large values may - Brother International BES-961BC | Instruction Manual - English - Page 90
Chapter 4 Editing of Embroidering Data 7. Press END after setting is finished. Press when setting continuously. 88 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 91
Chapter 5 Setting This Chapter describes how to set a sewing speed, correct trouble including thread breakage and others related to machine motions. - Brother International BES-961BC | Instruction Manual - English - Page 92
of total stitch number in automatic step back Lower thread counter counts (→ Page 95) Stitch counter indication (→ Page 95) Setting of Machine Selection of embroidery hoop (→ Page 96) Display of every head/every other head (→ Page 96) Speed range (→ Page 97) Speed in speed range (→ Page 98) Thread - Brother International BES-961BC | Instruction Manual - English - Page 93
Chapter 5 Setting Setting of Environment Return to start point after embroidering end (→ Page 106) Method of reflecting modified machine speed (→ Page 107) Power voltage (→ Page 107) Data transfer speed (→ Page 108) Display language (→ Page 109) Alarm sound (→ Page 110) Boring mode ON/OFF (→ Page - Brother International BES-961BC | Instruction Manual - English - Page 94
Chapter 5 Setting Setting of Needle Bars Needle bars allocated in the sequence of sewing can be modified. s This setting is explained on the basis of the BES-1261BC screen. 1. Press . 2. Select a sewing sequence to modify by pressing . The current embroidering sequence is selected while - Brother International BES-961BC | Instruction Manual - English - Page 95
Thread Breakage Sensor Validity or invalidity and sensitivity of the thread breakage sensor can be set. Chapter 5 Setting Setting of sensor validity/invalidity s This function is previously set to valid for all heads upon shipment. 1. Press . 2. Specify the number of a machine head by pressing - Brother International BES-961BC | Instruction Manual - English - Page 96
Chapter 5 Setting 4. Input sensitivity of the thread breakage sensor. 5. Press END . Modified setting is saved and the previous screen is displayed again. Automatic Step-Back The number of stitches to step back automatically in case of a thread breakage can be set. s Setting can be done within - Brother International BES-961BC | Instruction Manual - English - Page 97
Chapter 5 Setting Setting of Lower Thread Counter/Stitch Counter s The lower thread counter reduces the indication each time one pattern is finished. After the reduction is finished, an error message can be displayed. s The stitch counter increases the indication stitch by stitch. s The lower - Brother International BES-961BC | Instruction Manual - English - Page 98
Chapter 5 Setting Setting of Machine Machine motions can be set. Embroidery Hoop Specify a type of an embroidery hoop set on the machine. s A type of a hoop to be selected varies depending on a type of a hoop (flat or cap) selected by a switch on the - Brother International BES-961BC | Instruction Manual - English - Page 99
Chapter 5 Setting Speed Range A range of speed for each needle bar can be set. s This setting is explained on the basis of the BES-961 screen. s The speed range can be set within the range of 1 ~ 6. 1. Press . 2. Select by pressing . 3. Press . 4. Select a needle bar by pressing . When setting - Brother International BES-961BC | Instruction Manual - English - Page 100
Chapter 5 Setting Speed of Each Speed Range Maximum speed of each range can be set. s Speed can be input in increments of 10spm. s The upper limit of a speed to be set varies depending on a selected hoop. 1. Press . 2. Select by pressing . 3. Press . 4. Select a speed range to modify by - Brother International BES-961BC | Instruction Manual - English - Page 101
setting whether to reset a thread breakage error automatically This function is previously set to (Manual) upon shipments. For resetting an error automatically For resetting an error manually For setting whether to stop embroidering temporarily at the mending end point For stopping embroidering - Brother International BES-961BC | Instruction Manual - English - Page 102
Chapter 5 Setting Setting of thread breakage error resetting method 4. Select by pressing . 5. Press for modifying a resetting method. For setting whether to stop embroidering temporarily at the mending stop point 4. Select by pressing . 5. Press and select whether to stop embroidering temporarily - Brother International BES-961BC | Instruction Manual - English - Page 103
Chapter 5 Setting Thread Trimming Length Length of thread to leave on the needle bar after thread trimming can be set for each needle bar. s This function is previously set to 5 upon shipments. 1. Press . 2. Select by pressing . 3. Press . 4. Select a needle bar to modify by pressing . Press - Brother International BES-961BC | Instruction Manual - English - Page 104
Chapter 5 Setting 1. Press . 2. Select by pressing . 3. Press . 4. Input thread withdrawal length by pressing ten keys. 5. Press END . Modified setting is saved and the previous screen is displayed again. Inching Whether to select the inching mode for thread trimming can be set. s This - Brother International BES-961BC | Instruction Manual - English - Page 105
3. Press . 4. Specify coordinates of the upper left of the sewing area. Move the hoop by pressing . 5. Press Pressing Indicates a currently set embroidery area . set a maximum area designated for a currently set hoop. 6. Specify coordinates of the lower right of the sewing area. Move the hoop - Brother International BES-961BC | Instruction Manual - English - Page 106
Chapter 5 Setting Registration of Sewing Start Position Register a position to start sewing. s When returning to a registered sewing start position, hold down STOP and press . 1. Press the key. The hoop coordinates are displayed. 2. Shift the hoop to a position to start sewing by pressing the . - Brother International BES-961BC | Instruction Manual - English - Page 107
Chapter 5 Setting Hoop Automatic Retract Set whether to move the hoop automatically to the retract point at the end of sewing. s This function is previously set to no hoop automatic retract upon shipments. 1. Press . 2. Select whether to retract the hoop automatically by pressing . For - Brother International BES-961BC | Instruction Manual - English - Page 108
Chapter 5 Setting Setting of Environment Return to Start Point Whether to return to the start point after sewing is finished can be set. 1. Press twice. 2. Select by pressing . 3. Press . 4. Select by pressing . 5. Select whether to validate a return to the start point by pressing . When the - Brother International BES-961BC | Instruction Manual - English - Page 109
Chapter 5 Setting Speed Range For setting whether to reflect modified machine speed to all needle bars. 1. Press twice. 2. Select by pressing . 3. Press . 4. Select by pressing . 5. Modify setting by pressing . Press ESC for invalidating the modification. 6. Press END . Modified setting is - Brother International BES-961BC | Instruction Manual - English - Page 110
5. Press END . Modified setting is saved and the previous screen is displayed again. Setting of RS-232C Communication Speed Speed for transferring embroidery data between the operation panel and a personal computer with BE-100 installed. s The transmission speed can be selected within the range of - Brother International BES-961BC | Instruction Manual - English - Page 111
Display Language A language to display on the screen can be set. s The following languages can be selected. Display JPN Eng Espa~n~ l Contents Japanese English Spanish 1. Press twice. 2. Select by pressing . Chapter 5 Setting 3. Press . 4. Select [Language] by pressing . 5. Select a - Brother International BES-961BC | Instruction Manual - English - Page 112
Chapter 5 Setting Alarm Sound Whether to generate a sound in case of an error can be set. s The following sounds can be set. ON OFF 5 A sound is generated until the error is reset. A sound is generated twice. A sound is generated five times. 1. Press twice. 2. Select by pressing . 3. Press . - Brother International BES-961BC | Instruction Manual - English - Page 113
Chapter 5 Setting Boring Whether to validate or invalidate the boring mode and to shift data in case of boring can be set. s This setting is available only for sewing data which has been created for boring. s The machine itself cannot check if the sewing data is for boring or not. Therefore, - Brother International BES-961BC | Instruction Manual - English - Page 114
Chapter 5 Setting 5. Validate or invalidate the boring mode by pressing . When the boring mode is valid When the boring mode is invalid Validation/Invalidation of Data Shift 1. Press twice. 2. Select by pressing . 3. Press . 4. Select by pressing . 5. Validate or invalidate the data shift by - Brother International BES-961BC | Instruction Manual - English - Page 115
Display of Information Information about the machine and patterns can be displayed on the screen. Chapter 5 Setting Pattern Information Detailed information about a selected pattern can be checked. s Contents of information to be displayed are as shown below. Size of sewing data (mm) Coordinates - Brother International BES-961BC | Instruction Manual - English - Page 116
Chapter 5 Setting Features of Machine Detailed information of the machine can be checked. s Contents of information to be displayed are as shown below. Maximum moving range of flat hoop (for all heads) Maximum moving range of flat hoop (for every other head) Maximum moving range of cap hoop Number - Brother International BES-961BC | Instruction Manual - English - Page 117
Chapter 5 Setting Information about Versions Information about CPU ROM version, etc. can be checked. s Contents of information to be displayed are as shown below. Operation panel version Main CPU ROM version Upper axis CPU ROM version Lower axis CPU ROM version Interface CPU ROM version 1. Press - Brother International BES-961BC | Instruction Manual - English - Page 118
Chapter 5 Setting 116 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 119
Chapter 6 Operation of Machine - Brother International BES-961BC | Instruction Manual - English - Page 120
Chapter 6 Operation of Machine 1. Operating Procedures 1-1 Power Source • Turn the power on to the machine. • A message is displayed on the LCD. • The alarm sounds three times and the needle bar and the presser foot move upward. Then the hoop moves to the zero point and the sewing data screen is - Brother International BES-961BC | Instruction Manual - English - Page 121
2. Machine Stop 2-1. Stopping of Machine Chapter 6 Operation of Machine Press the emergency stop switch or to the STOP machine. 2-2. Resetting Emergency Stop • When either emergency stop button is depressed, "Emergency stopping" is displayed on the operation panel. • For resetting the - Brother International BES-961BC | Instruction Manual - English - Page 122
Chapter 6 Operation of Machine 3. Measures against Thread Breakage 3-1 Remedies 1. If embroidering is suspended due to thread breakage, the THREAD SENSOR lamp of the machine head with a thread breakage blinks. 2. Correct the broken thread and pass it through again. * Refer to "Chapter 1, 4-1 - Brother International BES-961BC | Instruction Manual - English - Page 123
MENDING lamps off) are stopped. When resewing is completed, the other machine heads (except those halted or with bed retracted) also start embroidering. s Manual operation The mending start and end positions can be set for each machine head using the MENDING switch on the tension plate. The MENDING - Brother International BES-961BC | Instruction Manual - English - Page 124
Chapter 6 Operation of Machine No.1 Stitch No.2 Stitch No.3 Stitch Stand by position A No.3 Mending LED is off. No.1 Stitch No.2 Stitch No.3 Stitch B Mending LED Stand by position A 1. Turn off the MENDING lamp No. 3 at the standby position A. (The position A should be the mending end - Brother International BES-961BC | Instruction Manual - English - Page 125
operation for a long time. Doing so may cause damage to the machine. 5. Hoop Feed Position • In order to ease mounting and dismounting of the embroidery hoop, another needle position can be set as a hoop feed position in the movable area additionally to the current needle position. • In order to - Brother International BES-961BC | Instruction Manual - English - Page 126
Chapter 6 Operation of Machine 6. Area Check 6-1 External Tracing Embroidering start position • If the check switch is pressed in other cases than "area over", the rectangular outline of the pattern is traced. 6-2 Automatic Hoop Movement in Area 0.1mm (Example) 0.1mm Embroidering area • If " - Brother International BES-961BC | Instruction Manual - English - Page 127
Chapter 6 Operation of Machine 7. Jog Switches 7-1 Hoop Movement to Start Position The hoop immediately after the embroidering mode becomes valid can be moved so that the start position can be set as required. BES-961BC • BES-1261BC 125 - Brother International BES-961BC | Instruction Manual - English - Page 128
Chapter 6 Operation of Machine 7-2 Inching Mode during Embroidering (Forcible Hoop Movement) Note) • Moving the frame greatly in the inching mode may cause an interference with the machine. Pay utmost care in the inching mode. • The frame movement in inching mode is cleared when the power is turned - Brother International BES-961BC | Instruction Manual - English - Page 129
Chapter 6 Operation of Machine 8. Detection of Zero Point After the zero point is detected, the hoop returns to the initial point 1. Before starting sewing, press 0 SPACE while pressing STOP when the initial screen is displayed. Initial screen 2. The hoop moves and the zero point is - Brother International BES-961BC | Instruction Manual - English - Page 130
Chapter 6 Operation of Machine 128 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 131
Chapter 7 Maintenance - Brother International BES-961BC | Instruction Manual - English - Page 132
they can cause vomiting and diarrhoea. Keep the oil out of the reach of children. • Keep the machine clean at all times to prevent machine trouble. • Keep the machine clean. Remove dirt with a soft, dry cloth. If necessary, clean with the detergent-soaked cloth, then wipe off the detergent with - Brother International BES-961BC | Instruction Manual - English - Page 133
Chapter 7 Maintenance 2. Oiling To extend the machine's service life, supply oil to the following places at regular intervals. (Note) • When oiling, be sure to supply Brother's machine oil (Nisseki Sewing Lube #10 or the equivalent) using the dropper. • Excessive oiling may cause the material to be - Brother International BES-961BC | Instruction Manual - English - Page 134
Chapter 7 Maintenance s BES-961BC Lubricate the following part indicated by the arrow ("clearance" between the connecting rod and the needle thread take-up bearing) once a week. (Note) • In lubrication, select needle bar 9 and remove arm cover L to check the lubrication area. Be sure to wipe off - Brother International BES-961BC | Instruction Manual - English - Page 135
7 Maintenance 3. Greasing To extend the machine's service life, supply grease to the following places at right. Check that it is engaged, and then tighten the bolts. • When attaching the presser foot guide plate r, move the presser foot up and down by the retracting lever to check that is it not - Brother International BES-961BC | Instruction Manual - English - Page 136
remove needle bar case y. 4. Loosen three bolts u, and remove presser foot guide plate i. 5. Grease all the grooves of the thread takeup cam o and engaged, and then tighten the bolts. • When attaching the presser foot guide plate i, move the presser foot up and down by the retracting lever - Brother International BES-961BC | Instruction Manual - English - Page 137
remove the needle case w. 3. Loosen three screws e, and remove the presser foot guide plate r. 4. Loosen two screws t, and remove the arm cover L y. 5. engaged, and then tighten the bolts. • When attaching the presser foot guide plate r, move the presser foot up and down by the retracting lever - Brother International BES-961BC | Instruction Manual - English - Page 138
Then tighten the screws. Also grease the presser bar spring !4, the pressure bar guide bracket !5, the pressure bar metal U !6 and D !7. y !9 i is engaged, and then tighten the bolts. • When attaching the presser foot guide plate i, move the presser foot up and down by the retracting lever to - Brother International BES-961BC | Instruction Manual - English - Page 139
and remove the bed covers B y and C u. t r ey 4. Grease the X-feed linear guides (3 positions), the Y-feed linear guides (one each on the right and left), and the linear guide inside the No. 3 bed. Slide the guide to spread grease entirely. 5. After greasing, assemble in the reverse order. BES - Brother International BES-961BC | Instruction Manual - English - Page 140
Chapter 7 Maintenance 138 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 141
Chapter 8 Standard Adjustment - Brother International BES-961BC | Instruction Manual - English - Page 142
Chapter 8 Standard Adjustment CAUTION Turn off the power switch and pull out the plug before starting adjustment. Failure to do so may start the machine unintentionally through an accidental activation of the START switch, resulting in bodily injuries. • Adjustment If adjustment should be made - Brother International BES-961BC | Instruction Manual - English - Page 143
the center of the rotary hook shaft. Adjust the position of the needle bar thread guide so that the set screw r on it is turned to the right by 25 • Make sure that the top dead center stopper does not hit the needle bar guide rail i at this time. • When tightening the upper dead point stopper bolt - Brother International BES-961BC | Instruction Manual - English - Page 144
Chapter 8 Standard Adjustment s When using the bottom dead center gauge 180° q q w e Cutting section u i o t y r Cutting section e 10.8mm Tighten the bolt o so that the clearance can be even. i !0 u Do not hit this section. o !0 142 BES-961BC • BES-1261BC - Brother International BES-961BC | Instruction Manual - English - Page 145
the needle bar clamp so that it faces the front. Note) • Make sure that the top dead center stopper u does not hit the needle bar guide rail !0 at this time. • When tightening the upper dead point stopper bolt o, insert the longer side of the attached wrench into the bolt and tighten - Brother International BES-961BC | Instruction Manual - English - Page 146
Chapter 8 Standard Adjustment 2. Replacing (Attaching) Rotary Hook Lower shaft 1. Turn the power switch off. 2. Tighten the screw q of the rotary hook cutting section to fit to that of the lower shaft w. 3. When mounting, press it inward until it stops. Note) After replacing rotary hooks, refer to - Brother International BES-961BC | Instruction Manual - English - Page 147
2mm 2mm r u 0.3~0.5mm t y 4. Turn the pulley B until the pulley indication mark "3" and the stop mark "NH3" are aligned. 5. Turn the rotary hook r manually so that the rotary hook point is aligned properly. 6. Loosen the set screw y on the side of the bed t. 7. Turn the eccentric screw u on the - Brother International BES-961BC | Instruction Manual - English - Page 148
of each head turns to a currently set alignment position for adjustment of the rotary hook. 140˚ 150 200 Rotary hook's point 4. Turn the pulley B q manually until the relationship between the needle point and the rotary hook's point can be easily checked (at around 140° of the scale). 5. Press the - Brother International BES-961BC | Instruction Manual - English - Page 149
Chapter 8 Standard Adjustment 6. After timing adjustment the is finished for each head, set the pulley B q to the stop position (at 100˚ of the scale) and press ESC . The machine enters the standby state. ↓ The adjustment of the rotary hook is completed and the timing is stored. The rotary hook - Brother International BES-961BC | Instruction Manual - English - Page 150
Chapter 8 Standard Adjustment 6. Adjustment of Thread Trimmer 6-1 Attaching the Fixed Knife q Attach the fixed knife q to the pin w and move it backward to the end of the slot, then mount it there. w 6-2 Checking the Movable Knife Position 1. Turn the power switch on and wait until the hoop - Brother International BES-961BC | Instruction Manual - English - Page 151
e w * Bad example ˰ q Toward this side Chapter 8 Standard Adjustment • The thread trimmer connecting rod B q has a backlash of about 0.1 ~ 0.2 mm back and forth. Tighten the two bolts e while pulling them forward by the backlash amount. • Tighten the two bolts e so that the thread trimmer - Brother International BES-961BC | Instruction Manual - English - Page 152
Chapter 8 Standard Adjustment 6-3 Adjusting the Belt Tension The belt Tension is adjusted to the optimum tension at the time of shipment from the factory. However, as the belt is used,it becomes run in and may loosen around the machine pulley and motor pulley . Use the following procedure to check - Brother International BES-961BC | Instruction Manual - English - Page 153
Chapter 9 List of Error Messages - Brother International BES-961BC | Instruction Manual - English - Page 154
Chapter 9 List of Error Codes Code E-02 E-03 E-04 E-05 E-06 E-07 E-09 E-0A E-14 E-18 E-21 E-22 E-23 E-24 E-25 E-26 E-27 E-28 E-29 E-2A E-2B E-2C E-2D E-2E E-2F Error Overtravel error during home positioning detection Stop SW was pressed during home positioning Zero positioning is out of range - Brother International BES-961BC | Instruction Manual - English - Page 155
Chapter 9 List of Error Codes Code E-31 Error Measures E-32 E-33 E-34 E-36 Area over Set the embroidering area again or move the hoop to a sewable position. E-38 E-39 E-3C E-A1 Main(Z) motor lock Press . If the same error occurs frequently, the STOP spindle mechanism is faulty. E-A2 E-A3 - Brother International BES-961BC | Instruction Manual - English - Page 156
Chapter 9 List of Error Codes Code E-BA Error Power supply frequency error E-BC E-BD No power error Lower shaft flash memory error E-BE Lower shaft version-up error E-C1 E-C2 Area over during embroidering Wiper out error E-C4 E-CB Presser foot down error Main(Z) motor speed error E-CE E-D0 - Brother International BES-961BC | Instruction Manual - English - Page 157
Chapter 10 Troubleshooting If there is any indication of trouble with the machine, check and correct as described in the table. If the trouble cannot be corrected, turn off the power and contact your distributor for corrective actions. - Brother International BES-961BC | Instruction Manual - English - Page 158
Chapter 10 Troubleshooting Mechanical Section Check these points once again Problem sThread breakage Check Point • Is the sNot embroidered properly • Is the material edge caught in the machine? (Are embroidery hoop and other related parts operating correctly?) • Is the material stretched properly - Brother International BES-961BC | Instruction Manual - English - Page 159
Troubleshooting Problem sMachine operation abnormal Check Point • Is any set screw of the rotary encoder loosened? • Is any set screw of the machine pulley loosened? • Is any set screw of the machine motor pulley loosened? • Is embroidery can be rotated forcibly by manual operation. 2.Check that - Brother International BES-961BC | Instruction Manual - English - Page 160
Check these points once again Chapter 10 Troubleshooting Electrical Section Trouble Check Point sThe operation panel is not error is indicated on the • Refer to the error message list for troubleshooting. operation panel, and no operation If the error persists, contact your distributor. is possible - Brother International BES-961BC | Instruction Manual - English - Page 161
Connection and Installation of Optional Equipment - Brother International BES-961BC | Instruction Manual - English - Page 162
Connection and Installation of Optional Equipment Attaching Bobbin Winder r i q e o y t u w !0 1. Remove four screws q and dismount the side cover LB w. 2. Set the spool shaft B e into the hole of the removed side cover LB w and fix the shaft with a nut and a spring washer. Then put the - Brother International BES-961BC | Instruction Manual - English - Page 163
in the direction of the arrow. 5. Press the bobbin hold r. Note) If the thread cannot be wound evenly, loosen the screw t and move the thread guide e right and left for adjustment. In order to wind more threads around the bobbin, loosen the thread y and move the bobbin hold r. 6. After winding is - Brother International BES-961BC | Instruction Manual - English - Page 164
INSTRUCTION MANUAL BROTHER INDUSTRIES,LTD. NAGOYA,JAPAN Printed in Japan 155-961BC,C61 S93961-102 1998.08. B (1)
INSTRUCTION MANUAL
Please read this manual before using the machine.
Please keep this manual within easy reach for quick reference.
NINE NEEDLE SIX HEAD ELECTRONIC EMBROIDERY MACHINE
TWELVE NEEDLE SIX HEAD ELECTRONIC EMBROIDERY MACHINE
BES-961
BC
BES-1261
BC