Brother International BES-961BC Instruction Manual - English - Page 149
Adjustment of Presser Foot Height
View all Brother International BES-961BC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Chapter 8 Standard Adjustment 6. After timing adjustment the is finished for each head, set the pulley B q to the stop position (at 100˚ of the scale) and press ESC . The machine enters the standby state. ↓ The adjustment of the rotary hook is completed and the timing is stored. The rotary hook returns to the stop position accordingly. 5. Adjustment of Presser Foot Height w q material 1. Turn the power switch off. 2. Select the needle bar No. 1. 3. Loosen the screw w of the presser foot q, and adjust the presser foot q until it comes above the cloth top surface when it is at the alignment position (where the pulley B indication mark "3" and the cover indication mark "3" are aligned). BES-961BC • BES-1261BC 147
Chapter 8
Standard Adjustment
BES-961BC
•
BES-1261BC
147
6.
After timing adjustment the is finished for each
head, set the pulley
B
q
to the stop position
(at 100˚ of the scale) and press
ESC
ESC
. The
machine enters the standby state.
The adjustment of the rotary hook is completed
and the timing is stored.
The rotary hook
returns to the stop position accordingly.
↓
5. Adjustment of Presser Foot Height
1.
Turn the power switch off.
2.
Select the needle bar No. 1.
3.
Loosen the screw
w
of the presser foot
q
, and adjust the presser foot
q
until it comes
above the cloth top surface when it is at the alignment position (where the pulley B indication
mark "3" and the cover indication mark "3" are aligned).
w
q
material