Brother International BM-917A Instruction Manual - English and Spanish - Page 3
Caution
View all Brother International BM-917A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
A CAUTION Cleaning • * Turn off the power switch before carrying (s) Be sure to wear protective goggles and A out cleaning. The motor will keep turning gloves when handling the lubricating oil, so even after the power is switched off as a that no oil gets into your eyes or onto your result of the motor's inertia. Wait until the skin, otherwise inflammation can result. motor stops fully before starting work. Furthermore, do not drink the oil under any The machine may operate if the treadle is circumstances, as it can cause vomiting and pressed by mistake, which could result in diarrhoea. injury. Keep the oil out of the reach of children. Maintenance and inspection 4 • • Maintenance and inspection of the sewing When turning the machine pulley by hand, machine should only be carried out by a turn the pulley until the needle is at the qualified technician. final position after one cycle. 0 • Ask your Brother dealer or a qualified electrician to carry out any maintenance and inspection of the electrical system. A 5 Turn off the power switch and disconnect the power cord from the wall outlet at the following times, otherwise the machine may operate if the treadle is pressed by mistake, If the needle is at a point midway through the cycle when the power is turned on, the machine will immediately start operating, A • which could result in injury. If the power switch needs to be left on when carrying out some adjustment, be extremely careful to observe all safety precautions. which could result in injury. i rk • Use only the proper replacement parts as However, the motor will keep turning even g by Brother. after the power is switched off as a result of the motor's inertia. Wait until the motor 0 stops fully before starting work. • If any safety devices have been removed, be absolutely sure to re-install them to their original positions and check that they • When carrying out inspection, operate correctly before using the machine. adjustment and maintenance • When replacing consumable parts such as the loopers and knife • Any problems in machine operation which result from unauthorized modifications to the machine will not be covered by the warranty. -3- Model No. CB3-B916A, B917A (English)