Brother International CT-1200 Owners Manual - English - Page 13

REPLACEMENT INSTRUCTIONS HOW TO REMOVE / AND RESET THE BOTTOM PLATE Before replacing any parts, unplug the vacuum cleaner from the electrical outlet and set the handle to the Parallel position. Then turn the vacuum cleaner over, exposing the underside. REMOVE Loosen the bottom plate by sliding the latch away from the mounting screw. (Fig.30) Then remove the bottom plate. Latch Bottom plate Latch Mounting screw REMOVE FASTEN Fig.30 RESET Make sure that all the parts are properly set and the wires are not pinched. 1 Insert the front six tabs of the bottom plate into the grooves at the front end of the nozzle head, then reset the bottom plate.(Fig. 31) 2 Fasten it by sliding the latch as shown. (Fig. 30) Grooves Tabs Bottom plate Fig.31 HOW TO REPLACE THE HEADLIGHT LAMP Unplug the vacuum cleaner from the electrical outlet. Place the vacuum cleaner in the parallel position. 1 Remove the lens cover by unscrewing the screw. (Fig. 32) 2 Remove the lamp from the socket by pushing in gently and turning counterclockwise. (Fig. 33-1) 3 Install the new lamp by pushing it gently into the socket and turning clockwise. (Fig. 33-2) Use any standard bayonet base vacuum cleaner lamp rated 125V, 20W. 4 Replace the lens cover and secure with the screw. Screw 2 1 2 1 Lens cover Fig.32 Fig.33-1 Fig.33-2 13