Brother International CT-1200 Owners Manual - English - Page 16

REPLACEMENT INSTRUCTIONS EXPLODED VIEW OF AGITATOR ASSEMBLY FOR REPLACING AGITATOR BRUSHES (CT1200 type) Agitator support L Nut Main pulley Agitator shaft Washer Washer Brush Agitator pipe Brush rotor B Agitator suppor R E-clip Fig.43 HOW TO REPLACE AGITATOR BRUSHES (CT1200 type) When replacing the brush, replace all four brushes at the same time for more efficient cleaning. 1 Remove the E-clip from the agitator shaft by using a pick. (Fig. 44) 2 Then pull out the agitator shaft from the right end as shown. (Fig. 45) Take care not to deform the agitator shaft. 3 Pull or pry out the main pulley and the brush rotor B from agitator pipe. (Fig. 46) 4 Now the brushes can be easily removed. (Fig. 47) Agitator shaft E-clip Fig.44 Agitator support R Brush rotor B Fig.45 Agitator pipe Main pulley Fig.46 Brush 5 After inserting the new brushes, reinstall the main pulley and the brush rotor B. Make sure they are completely and firmly inserted. (Fig. 48) Brush rotor B Fig.47 Main pulley Fig.48 6 Reinstall other parts using the reverse procedure. Always fasten the E-clip on the shaft before reinstalling the agitator assembly. 16