Brother International CT-1200 Owners Manual - English - Page 18

REPLACEMENT INSTRUCTIONS HOW TO REPLACE AGITATOR BRUSHES AND BRUSH ROTOR B (CT1500 type) When replacing the brush, replace all four brushes at the same time for more efficient cleaning. 1 Remove the nut from the agitator shaft by turning clockwise. (Fig. 53) 5 Then pull out the brush rotor B from the agitator pipe. (Fig. 57) Fig.53 2 Remove the washer from the agitator shaft. (Fig. 54) Brush rotor B Agitator pipe Fig.57 6 Now the brushes can be removed easily. (Fig. 58) Washer Fig.54 3 Then pull out the agitator support B from the agitator shaft as shown. (Fig. 55) Agitator support B Agitator shaft Fig.55 4 Pull out or pry the agitator pipe with the brush and the brush rotor B from the agitator shaft. (Fig. 56) (Take care not to bend or deform the agitator shaft.) Brush rotor B Main pulley Brush Fig.58 7 After inserting the new brushes, reinstall the agitator pipe and the brush rotor B. Make sure they are completely and firmly inserted. 8 Reinstall the other parts using the reverse procedure. Always reinstall the washer and the nut to the agitator shaft. Agitator shaft Agitator pipe Fig.56 18