Brother International DCP 585CW Quick Setup Guide - English - Page 28
To install MFL-Pro Suite, continue to, For Windows, Users, For Mac OS, Now go
UPC - 012502620464
View all Brother International DCP 585CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
For Wireless Network Users h Press a or b to choose TKIP or AES for Encryption Type? and press OK. Enter the WPA/WPA2-PSK password you wrote down in step 11 on page 26 using the a, b keys to choose each letter or number. You can use the d and c keys to move the cursor left and right. For example, to enter the letter a, press the a key once. To enter the number 3, hold down the a key until it appears. The letters appear in this order: lower case, upper case, numbers and then special letters. (For more information, see Entering Text for Wireless Settings on page 42.) Press OK when you have entered all the characters, then press settings. Go to i. Yes to apply your i Your machine will now try to connect to your wireless network using the information you have entered. If successful, Connected will appear briefly on the LCD. If your machine does not successfully connect to your network, verify your network settings collected in step 11 on page 26, then repeat a to h to make sure you have entered the correct information. If your access point does not have DHCP enabled you will need to manually configure the IP address, subnet mask and gateway of the machine to suit your network. See the Network User's Guide for details. Wireless setup is now complete. A four level indicator on the bottom of your machine's LCD will show the wireless signal strength of your access point or router. To install MFL-Pro Suite, continue to step 13. For Windows® Users: Now go to Page 31 For Mac OS® Users: Now go to Page 35 28