Brother International HL-3070CW Users Manual - English - Page 100
Reset Menu, Color Correction, Network for HL-3070CW users continued, Status, Enable, Signal, Channel - digital color printer
UPC - 012502622345
View all Brother International HL-3070CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Control Panel Network for HL-3070CW users (continued) Submenu 1 Submenu 2 Menu Selections Options Descriptions WLAN Status (Appears only when WLAN Enable is On.) Status Signal Channel Speed SSID 3 Shows SSID [uses a maximum of 32 digits and characters 0-9, a-z and A-Z in ASCII values] Comm. Mode Ad-hoc*/Infrastructure Shows the current Communication Mode. Set to Default Restores wired network settings of the internal print server to the factory default. WLAN Enable Off*/On Chooses Ethernet link mode. Factory Reset Restores all network settings of the internal print server to the factory default. The factory settings are shown in Bold with an asterisk. 1 On connection to the network, if the machine's 'IP METHOD' is 'AUTO' the machine will attempt to automatically set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found an APIPA IP address will be allocated, such as 169.254.[001-254].[000-255]. If the 'IP METHOD' of the machine is set to 'STATIC' you will need to manually enter an IP address from the machine's control panel. Reset Menu Display Shows Reset Printer Factory Reset Description Resets the printer and restores all printer settings (including command settings) to settings you have previously made with the control panel buttons. Resets the printer and restores the printer settings (including command settings) to the factory default settings. The factory settings are shown in Bold with an asterisk. Color Correction Submenu Menu Selections Color Calibration Calibrate Reset Options Descriptions Carry out calibration to revise the colors. (See Calibration on page 96.) Set the calibration parameters back to the default settings. (See Calibration on page 96.) The factory settings are shown in Bold with an asterisk. 90