Brother International KE-435C Instruction Manual - English - Page 77
How to make the work clamp plate
View all Brother International KE-435C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
17. MAKING THE FEED PLATE AND WORK CLAMP PLATE FOR INNER CLAMPING DEVICE 17-4. How to make the work clamp plate Condition 1 Condition 2 Condition 3 2636Q 2634Q 2635Q Work clamp 2637Q 2638Q [Condition 1] 1. Align the stitch with reference point D which is 11 mm above the center of the screw hole in the work clamp plate. 2. Make the work clamp plate so that it is 1.5 mm smaller than the size of the seam. 3. Make a 1 mm bevel all along the side of the work clamp plate that does not have a ridge line. [Condition 2] 1. Align the stitch with reference point E which is 9 mm above the center of the screw hole in the work clamp plate. 2. Make the work clamp plate so that it is 1.5 mm smaller than the size of the seam. 3. Make a 1 mm bevel all along the side of the work clamp plate that does not have a ridge line. 4. Then make a step of 0.5 mm as shown in the illustration. [Condition 3] 1. Align the stitch with reference point F which is 6 mm above the center of the screw hole in the work clamp plate. 2. Make the work clamp plate so that it is 1.0 mm smaller than the size of the seam. 3. Make a 1 mm bevel all along the side of the work clamp plate that does not have a ridge line. 4. Then make a step of 0.5 mm as shown in the illustration. KE-434C,435C 71