Brother International Laura Ashley Innov-is NX800 Users Manual - English - Page 122
turn the handwheel toward
View all Brother International Laura Ashley Innov-is NX800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
UTILITY STITCHES Start sewing. d Select stitch 39 . c CAUTION ● Select a stitch width of 6.0 mm (15/64 inch) or less, otherwise the needle may bend or break. ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Partially removing threads is called "drawnwork". This gives a beautiful result with fabrics that have a loose weave. Two ways to create drawnwork are described below. ■ Drawnwork (Example 1) • For details, refer to "Selecting stitching" (page 72). With the right side of the fabric facing up, sew d along the right edge of the frayed section. N Press e panel. (Settings key) in the operation X The settings screen appears. Press or (Stitch length keys) until f is displayed. Pull out several threads from the fabric. a Attach monogramming foot "N". b X 9The screen for mirror imaging the pattern appears. • For details, refer to "Replacing the presser foot" (page 41). 120