Brother International MFC 665CW Quick Setup Guide - English - Page 10
Improper Setup, Cleaning, Preparing System, Approx 4 Minutes
UPC - 012502615811
View all Brother International MFC 665CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
STEP1 Setting Up the Machine Improper Setup DO NOT touch the area shown in the illustration below. 7 Lift each lock release lever and gently push it until it clicks, and then close the ink cartridge cover. Note If the protective yellow cap comes off when you open the bag, the cartridge will not be damaged. 6 Install each ink cartridge in the direction of the arrow on the label. Take care to match the color of the lock release lever (1) with the cartridge color (2), as shown in the diagram below. 2 1 Note If the LCD prompts you to re-insert the ink cartridge correctly, after you install the ink cartridges, check that the ink cartridges are installed properly. The machine will clean the ink tube system for use for the first time. This process will occur only once, the first time ink cartridges are installed. The cleaning process will last approximately four minutes. The LCD shows: Cleaning iiiii Preparing System Approx 4 Minutes M brother XXXX 8