Brother International MFC 665CW Quick Setup Guide - English - Page 53
How to set the machine’s network settings to wireless LAN or wired LAN
UPC - 012502615811
View all Brother International MFC 665CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
For Network Users How to set the machine's network settings to wireless LAN or wired LAN To connect your Brother machine to a wireless or wired network you must configure the machine from the machine's control panel for the network type you are using. For wireless LAN On your machine, press Menu. Press a or b to choose LAN and press OK. Press a or b to choose Network I/F and press OK. Press a or b to choose WLAN and press OK. The wired network interface will become inactive with this setting. Press Stop/Exit. It will take about a minute for the LAN menu on the LCD to become available again. For wired LAN On your machine, press Menu. Press a or b to choose LAN and press OK. Press a or b to choose Network I/F and press OK. Press a or b to choose Wired LAN and press OK. The wireless network interface will become inactive with this setting. Press Stop/Exit. Restoring the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. 1 Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable). 2 Press Menu. 3 Press a or b to choose LAN. Press OK. 4 Press a or b to choose Factory Reset. Press OK. 5 Press 1 to select Yes. 6 Press 1 to select Reboot. 7 The machine will restart, re-connect cables once this is complete. 51