Brother International MFC-8460n Quick Setup Guide - English - Page 33

Setting Up the machine For Mac OS® X 10.2.4 or greater Make sure that you have finished the instructions from Step 1 "Setting Up the machine" on pages 4 - 11. 1 Turn off and unplug the machine from the AC outlet and disconnect it from your Macintosh® if you already connected an interface cable. 7 After the DeviceSelector window appears, connect the network interface cable to the machine, and then connect it to a free port on your hub. Installing the Drivers & Software 2 Turn on your Macintosh®. 3 Insert the supplied CD-ROM for Macintosh® into your CD-ROM drive. 4 Double-click the Start Here OSX icon to install the drivers and MFL-Pro Suite. If the language screen appears, choose your language. The DeviceSelector window will not appear if you have also connected a USB interface cable to the machine before restarting your Macintosh®or if you are overwriting a previously installed version of the Brother software. If you encounter this problem continue with the installation skipping Steps 9 to 12. You should select your Brother machine from the Model pull-down list in the main screen of ControlCenter2. (For details, see the Software Use's Guide on CD-ROM.) 5 Click MFL-Pro Suite to install. 8 Plug in the power cord and turn on the machine. Macintosh® Network Network Administrators 6 Follow the on-screen instructions, and restart your Macintosh®. Continued ... 31