Brother International MFC 9060 Service Manual - Page 90
Operating Procedure, NOTES, Firmware Switches WSW01 through WSW50
UPC - 012502040064
View all Brother International MFC 9060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
WSW No. WSW37 WSW38 WSW39 WSW40 WSW41 WSW42 WSW43 WSW44 WSW45 WSW46 WSW47 WSW48 WSW49 WSW50 Firmware Switches (WSW01 through WSW50) Continued Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Function setting 23 Function setting 24 Function setting 25 Function setting 26 Function setting 27 Function setting 28 Function Reference Page V-49 V-49 V-49 V-49 V-49 V-49 V-49 V-49 V-49 V-49 V-49 V-50 V-50 V-50 Operating Procedure (1) Press the 1 and 0 keys in this order in the initial stage of the maintenance mode. The equipment displays the "WSW00" on the LCD and becomes ready to accept a firmware switch number. (2) Enter the desired number from the firmware switch numbers (01 through 36). The following appears on the LCD: WSWXX = 0 0 0 0 0 0 0 0 (3) Use the and keys to move the cursor to the selector position to be modified. (4) Enter the desired number using the 0 and 1 keys. (5) Press the Set key. This operation saves the newly entered selector values onto the EEPROM and readies the equipment for accepting a firmware switch number. (6) Repeat steps (2) through (5) until the modification for the desired firmware switches is completed. (7) Press the Set or Stop key to return the equipment to the initial stage of the maintenance mode. NOTES: • To cancel this operation and return the equipment to the initial stage of the maintenance mode during the above procedure, press the Stop key. • If there is a pause of more than one minute after a single-digit number is entered for double-digit firmware switch numbers, the equipment will automatically return to the initial stage of the maintenance mode. Note The user-accessible selectors of the firmware switches are shaded in the tables given on the following pages. V - 10