Brother International MFC 9880 Owners Manual - Page 10
Preparation and Simple Use Guide, Steps to prepare and use the machine simply - ink
View all Brother International MFC 9880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
PREPARATION AND SIMPLE USE Preparation and Simple Use Guide Steps to prepare and use the machine simply Follow the steps below to prepare and use the machine simply. However, before you perform these steps, see Important Safety Information (page 152), and Advice for Preparation and Simple Use Guide (page 4). If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE. 1 Read the Quick Setup Guide Follow the instructions on the Brother Quick Setup Guide to set up the machine. 2 Setting the Document You can scan the document for faxing and copying from either the ADF (Automatic Document Feeder) or from the glass platen. Using the ADF (Automatic Document Feeder) The automatic document feeder (ADF) can hold up to 50 pages, feeding each one individually through the machine. Use standard (75 g/m2) paper when using the ADF. Always fan the pages well before placing them in the feeder. Recommended Environment Temperature: 20-30˚C (68-86˚F) Humidity: 50%-70% DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or fabric. (To copy or scan this kind of document, see Using the Glass Platen, page 2.) I Make sure documents written with ink are completely dry. I Documents must be from 14.7 to 21.6 cm wide, and from 12.7 to 35.6 cm long. 1 Insert documents face up, top edge first. 2 Adjust the paper guides to fit the width of your pages. 3 Stagger the pages. Then place them in the ADF, until you feel the first page lightly touch the feed roller. Documents are Face Up in the ADF Document Stopper Preparation and Simple Use Guide 1