Brother International PEDESIGNNEXT Users Manual - English - Page 272

Jump Stitch and Jump Stitch Trimming Jump Stitch and Jump Stitch Trimming Machine thread trimming according to settings specified in Layout & Editing If the multi-needle embroidery machine is selected in the Design Settings dialog box of Layout & Editing, trimming can be turned on or off at each jump stitch location. These settings are saved in embroidery data files (.pes). If you are using our multi-needle embroidery machine with the Jump Stitch Trimming function turned on to embroider this imported .pes file, the machine will trim the thread according to the PES data settings. a Note: For details on the jump stitch trimming function of the machine, refer to the Operation Manual provided with your embroidery machine. ■ Specifying trimming settings in Layout & Editing 1. Select the multi-needle embroidery machine in the Design Settings dialog box. c "Specifying the Design Page Size and Color" on page 85 2. Display the trimming locations in Layout & Editing. c Memo of "Changing the display of the embroidery design" on page 70 3. Turn on/off jump stitch trimming for each embroidery pattern. c "Jump Stitch Trimming" on page 75 If necessary, change settings for the following. • Automatically turning off trimming when the jump stitch length is less than that specified. c "Jump Stitch Trimming" on page 75 and "About Minimum jump stitch length for thread trimming" on page 75 • Default setting for turning on/off jump stitch trimming when a new embroidery pattern is created. c "Adding jump stitch trimming to new patterns" on page 275 Stitching Jump stitch Stitching a Note: These settings are applied only when embroidering with our multi-needle embroidery machines. These settings are not applied with any other embroidery machine. 270