Brother International PR-1000 Operation Manual for Premium Pack I Optional acc - Page 13

USING THE CAMERA TO CONNECT PATTERNS Instead of using thread marks, the camera can be used to connect patterns. An area of 17 cm × 33 cm (6-1/2 inches × 13 inches) can be embroidered when the camera is used to connect patterns. Select the appropriate frame depending on the size of the embroidery. We recommend using the large embroidery frame (200 mm × 360 mm (7-7/8 inches × 14 inches)) when using the camera to connect patterns. c Note • When installing the embroidery frame (small) (40 mm × 60 mm (1-1/2 inches × 2-3/8 inches), cap frames, cylinder frame or the round frames, you can not connect patterns using this function. • Split (Large-size) embroidery patterns cannot be used with this function. • You can not connect patterns using this function while the machine is set to the Link mode. Examples of Connected Patterns Two patterns can be connected by selecting the reference point and reference edge of each pattern so that they can be aligned using the camera. When connecting patterns, the reference edge of each pattern will be along a single straight line. d (Example) : Reference edge : Reference point a b 12 e In order to understand how to connect patterns, first try following the procedure outlined in "Practice (Connecting Three Patterns)" on page 13.