Brother International PR-620 Needle Set Procedure - English
Brother International PR-620 Manual
 |
View all Brother International PR-620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International PR-620 manual content summary:
- Brother International PR-620 | Needle Set Procedure - English - Page 1
PR-600, PR-600C For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: [email protected] Website: http://www.brother-usa.com/industembroidery/tech_down.aspx To program needle selection, a custom thread palette must be created. Start from the main menu screen as shown. Press the - Brother International PR-620 | Needle Set Procedure - English - Page 2
. Press the arrows until Is displayed. (NOTE: If you have already created a custom "1" table, select custom thread 2, and use table 2 throughout the remainder of these instructions, when table 1 is required). Press the in the box, so the name Madeira appears as shown. . This will allow the - Brother International PR-620 | Needle Set Procedure - English - Page 3
Madeira appears. box, press the arrows Press the 4 way arrows from the bottom as shown. to move enlarged "cursor" box to the leftmost box, second Use the number pad, and enter the number 1811. Press the set key. The screen should appear as such: 3 - Brother International PR-620 | Needle Set Procedure - English - Page 4
Press the right arrow such: of the 4-way arrow pad. The screen should appear as Enter the number 1622 and press . Repeat the last steps of pressing the right arrow, entering numbers, and pressing set, until six colors have been programmed. Program the number for the third box as 1833, the - Brother International PR-620 | Needle Set Procedure - English - Page 5
image of an "anchor" appeared over the #2 spool . Repeat these past steps of pressing the box with the numbers (3, 4, 5 and finally 6 when appropriate), and then using the 4-way arrow pad etc. color, and then press the set key . select the second, third, fourth, 5 - Brother International PR-620 | Needle Set Procedure - English - Page 6
"anchors" appear over the spools. The earlier versions of software would only allow five needles to be anchored. Latest versions allow all six to be they can represent the six needle bars of the machine. To program a design by needle bar sequence, start from the main menu. For our example, select - Brother International PR-620 | Needle Set Procedure - English - Page 7
Use the "page turn" key, and advance to page two. The screen should appear as such: The design displayed is contained in the software of the machine. This is the tension test design, which contains six vertical satin columns, as shown. Select the design. The screen should appear as such: 7 - Brother International PR-620 | Needle Set Procedure - English - Page 8
of the palette are to be considered the needle bars from left to right, with the left most color being needle bar one and the last color, the rightmost, being needle bar six. This allows the operator to place the spools of thread on the machine wherever desired, and then have the ability to - Brother International PR-620 | Needle Set Procedure - English - Page 9
software where certain colors of spools are placed. If the design were to be programmed with the order of the needle bars 4-1-6-2-5-3, select the fourth color from the left, #1944, use the arrow keys, then press the "set key" . Use the keys, to select the next color to program. Program the colors - Brother International PR-620 | Needle Set Procedure - English - Page 10
machine preparations as normal. Press the "Edit End" key and continue programming as needed. Press the "Sewing" key . The Screen should appear as such: Notice to the right of the color sequence boxes, the needle bar to be used have any questions, please contact Brother Technical Service. 10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
To program needle selection, a custom thread palette must be created.
Start from the
main menu screen as
shown.
Press the Settings key in the upper left corner of the screen.
The screen should appear as such:
Press the key with the hand symbol in the lower right corner to advance to page 2.
For Technical Assistance Please Call Toll Free
1-877-4BROTHER
Email:
Website
:
P
P
R
R
-
-
6
6
0
0
0
0
,
,
P
P
R
R
-
-
6
6
0
0
0
0
C
C
1