Brother International PR-650 Upgrade KIT CW Operation Manual PRCW1 - Page 24

USING THE MACHINE TO POSITION EMBROIDERY PATTERNS FOR CREATING CUTWORK c Continue the procedure starting with step d in "Creating an appliqué with the outline around a pattern" on page 20. Memo • An appliqué piece can be created along a desired shape around the embroidered pattern even when Cutwork mode is turned off. With Cutwork mode turned off, the cutting line "APPLIQUE MATERIAL" is embroidered, instead of it being cut out. Cutting Around an Embroidered Pattern 3 ■ Cutting the fabric along the outline of a pattern a Cut key b Outline tab c Cutting Line Distance keys d Distance between cutting line and pattern edge Note • Grayed-out keys are unavailable for use in this operation. Available keys vary depending on the cutout design and the specified settings. a Follow steps a and b in "Creating an appliqué with the outline around a pattern" on page 20. b Touch , and make sure is highlighted. With the "Cutting Line Distance" keys, specify the distance of the cutting line from the embroidery pattern. Memo • "Cutting Line Distance" can also be specified on page 2 of the Settings screen. c Continue the procedure starting with step d in "Creating an appliqué with the outline around a pattern" on page 20. ■ Cutting the fabric along the outline of a desired frame shape b a Follow steps a and b in "Creating an appliqué with the outline around a pattern" on page 20. a c 23