Brother International PR-650 Upgrade KIT CW Operation Manual PRCW1 - Page 7

ABOUT CUTWORK When using fabric that cannot be ironed, such as organza, place water-soluble stabilizer above and below the fabric, and secure the sheets with an embroidery frame. a Water-soluble stabilizer b Fabric, such as organza For details on affixing stabilizer, refer to "Attaching Stabilizer" on page 14. Precautions on using water-soluble stabilizer z Do not use with fabric that cannot be washed with water. z Avoid storing in an extremely humid or wet location. z Store in a dry location not exposed to humidity. Patterns requiring water-soluble stabilizer Use a water-soluble stabilizer when stitching the cut edges of a design or when embroidering using the net fill stitch. (Refer to "Attaching Water-Soluble Stabilizer" on page 15.) A sheet of non-woven watersoluble stabilizer is supplied. Optional film-type water-soluble stabilizers are available for use. For details on the optional water-soluble stabilizer, refer to Installation Guide. b a a Example of a design with cutouts b Example of net fill stitching Various patterns on the enclosed CD-ROM1 (for machines) require water-soluble stabilizer. For details on patterns included on the CD-ROM, refer to the separate Pattern List. By using PE-DESIGN NEXT + CW, original designs with cutouts and designs using the net fill stitch can be created. For details on installing PE-DESIGN NEXT + CW, refer to the Installation Guide. Trial embroidery Be sure to sew trial embroidery using same fabric and threads as project in order to check the embroidering and cutting results. 6