Brother International SB7050E Operation Manual - Page 62
Appliquéing
View all Brother International SB7050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
EMBROIDERY Remove the upper thread. k Note z Be sure to raise the presser foot lever before removing the upper thread. If you remove the upper thread with the embroidery foot lowered, it may cause malfunction. Set up embroidery thread for the next color, l and repeat steps b through h. X When the last color is embroidered, "Finished sewing." will appear on the display. Press , and the display will return to the initial screen. Cut the excess thread. m Memo z For the programmed thread cutting setting, refer to "Setting for embroidering" (page 52). Appliquéing Prepare the base fabric and the appliqué fabric (appliqué piece). Press (Settings key), and set the thread color display to NAME OF COLOR, so "APPLIQUE MATERIAL", "APPLIQUE POSITION" and "APPLIQUE" are displayed on the screen. Select an appliqué pattern. a X "APPLIQUE MATERIAL" is displayed on the screen. Apply iron-on stabilizer to the back of the b appliqué piece fabric, and stretch it on the embroidery frame. Lower the presser foot lever, and press c (Start/stop button). X The cut-out for the appliqué piece is sewn, and the machine stops. a b a Cut-out line b Appliqué piece fabric X "APPLIQUE POSITION" will be displayed on the screen. 60