Brother International SB7050E Operation Manual - Page 88
Error messages
View all Brother International SB7050E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
APPENDIX Error messages When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is displayed. If you press or do the operation correctly while the error message is displayed, the message disappears. No Error Message Probable Cause 1 There is a possibility that the data for the selected pattern is corrupted. 2 The start/stop button was pressed at a screen other than the embroidery screen. Upper thread broken. Upper thread not set up correctly. Upper thread has run out. 3 CAUTION Be sure to rethread the machine. If you press (Start/stop button) without rethreading the machine, the thread tension may be wrong or the needle may break and cause injury. 4 The machine is deleting a previously saved pattern while in embroidery edit mode. 5 You attempted to select a pattern after the USB media containing the pattern has been disconnected, then reconnected. 6 on the LCD was pressed when no card was inserted. 7 You retrieved a pattern while no USB media is connected. You tried to use imcompatible USB media. 8 The start/stop button or thread cutter button was pressed while the embroidery foot was raised. 86