Brother International SM1400 Operation Manual - Page 11
Changing the presser foot
View all Brother International SM1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Changing the presser foot Put a different presser foot on the needle 4 plate so that the bar on the presser foot is CAUTION in line with the slot on the shank. Lower the presser foot lever and fix the 1 5 presser foot onto the shank. If the presser ● Always turn off the machine before you change the presser foot. If you leave the foot is in the correct place, the bar should snap in. power on and step on the controller, the machine will start and you may be injured. ● Always use the correct presser foot for the stitch pattern you have chosen. If you use the wrong presser foot, the 1 2 needle may strike the presser foot and bend or break, and may cause injury. ● Only use presser feet that have been designed to be used with this machine. Using any other presser foot may cause accident or injury. 1 Shank 2 Bar ■ Presser foot installation orientation You will have to change the presser foot depending on what you want to sew and how. Turn off the machine. 1 Raise the presser foot lever. Raise the needle by turning the 2 handwheel toward you (counterclockwise) so that the mark on the wheel points up. 3 Remove the presser | Press the black foot by pulling it | button at the back of vertically downward. | the presser foot | holder to release the | presser foot. | | 1 | or | 1 2 |2 | | 3 | 1 Presser foot holder 2 Presser foot | | 1 2 Black button Presser foot holder | 3 Presser foot CAUTION ● If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury. Note ● Depending on the type of presser foot holder, the method of releasing the presser foot will vary. 10