Brother International SM1400 Operation Manual - Page 21
While lightly holding the thread, turn
View all Brother International SM1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
While lightly holding the thread, turn the 6 needle threader lever toward the front of Pass the end of the thread through the 0 presser foot, and then pull out about 5 cm the machine (toward you). The hook will pull the thread through the needle. (2 inches) of thread toward the rear of the machine. 1 Raise the needle threader lever. 7 1 1 5 cm (2 inches) Note ● If you incorrectly feed the thread you may cause sewing problems. Pull the loop of the thread passed through 8 the eye of the needle toward the rear of the machine. 1 1 Loop of thread CAUTION ● Be careful not to pull on the thread with force or it may bend the needle. ● If the thread does not pass through the eye of the needle, start from step 3 again. Raise the presser foot lever. 9 20