Canon 1188B001 User Manual - Page 21
The Wireless Controller, Adjusting the LCD Screen
View all Canon 1188B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started 21 operated at a very close range, replace the The Wireless Controller battery. E Inserting the Battery (Lithium Button Battery CR2025) Adjusting the LCD Screen Tab 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder. Using the Wireless Controller Rotating the LCD Panel Open the LCD panel 90 degrees. • You can rotate the panel 90 degrees downward. • You can rotate the panel 180 degrees toward the lens (allowing the subject to monitor the LCD screen while you use the viewfinder). Rotating the panel 180 degrees is also useful if you wish to include yourself when recording with the self timer. 180° 90° Preparations Point the controller at the camcorder's remote sensor when you press the buttons. NOTES The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. If the wireless controller does not work, check that [WL.REMOTE] is not set to [OFF ] ( 41). When the camcorder cannot be operated with the wireless controller, or when it can only be Subject can monitor the LCD screen LCD Backlight You can switch the brightness of the LCD screen to [NORMAL] or [BRIGHT]. MENU ( 24) 1 Turn on the camcorder.