Canon 1188B001 User Manual - Page 90
Trouble?
View all Canon 1188B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
90 Trouble? Problem Solution The disc cannot be ejected. Turn off the camcorder, disconnect the compact power adapter - and remove the battery pack. Restore the power supply and try again. The camcorder has exceeded its operational temperature. Disconnect the compact power adapter and remove the battery pack and let the camcorder cool down before resuming use. The disc cannot be recognized. The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If 99 the problem persists replace the disc. The disc is not correctly loaded. Check the disc. 22 The camcorder vibrates. Depending on the condition of the disc, the camcorder might - vibrate occasionally. This is not a malfunction. • The disc's rotation can be faintly heard. • Occasionally the operation sound can be heard. The disc is activated from time to time. This is not a malfunction. - After using the camcorder for a This is not a malfunction. Turn the camcorder off and let it cool - long time the lights up in for a while before resuming operation. red. Recording Problem Solution " " flashes red on the screen. The camcorder malfunctions. Consult a Canon Service Center. - Image will not appear on the Set the camcorder to . 28 screen. "SET THE TIME ZONE, DATE Set the time zone, date and time. 26 AND TIME" appears on the screen. Recharge the built-in lithium battery and set the time zone, date 100 and time. Pressing the start/stop button Set the camcorder to . 28 will not start recording. Load a recommended disc. 22 The disc is full (" END" flashes on the screen). Delete some 22 recordings (DVD-RW in VR mode) to free some space or 62 replace the disc. The camcorder has exceeded its operational temperature. - Disconnect the compact power adapter and remove the battery pack and let the camcorder cool down before resuming use. Cancel the disc protection. 64 Unfinalize the disc (DVD-RW in VIDEO mode). 71 Even after stopping recording, The scene or still image is being recorded on the disc. This is 28 the disc access indicator does not a malfunction. 29 not go off. The point where the start/stop There is a slight interval between pressing the start/stop button - button was pressed does not and the actual start of the recording on the disc. This is not a match the beginning/end of the malfunction. recording.