Canon 1188B001 User Manual - Page 93
List of Messages
View all Canon 1188B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Trouble? 93 Memory Card Operation Problem E Solution Memory card cannot be inserted. Memory card was not facing the correct direction. Turn the 22 memory card over and reinsert it. Memory card cannot be recorded. Memory card is full. Erase still images to free some space or 66 replace the memory card. Memory card was not initialized. Initialize the memory card. 69 The folder and file numbers have reached their maximum value. 41 Set [FILE NOS.] to [RESET] and insert a new memory card. Memory card cannot be played Insert a memory card. 22 back. Set the camcorder to . 33 Make sure the memory card is selected as the media for still 30 images. Image cannot be erased. Image is protected. Cancel the protection. 68 " " flashes in red. Card error occurred. Turn off the camcorder. Remove and 69 reinsert the memory card. Initialize the memory card if flashing persists. Printing Problem Solution The printer is not operating 1. Set the camcorder to . - even though the camcorder 2. Disconnect and reconnect the USB cable. and printer are correctly 3. Turn off the printer and turn it back on. connected. Additional Information List of Messages Message SET THE TIME ZONE, DATE AND TIME CHANGE THE BATTERY PACK TEMPERATURE TOO HIGH CANNOT RECORD TEMPERATURE TOO HIGH CANNOT REMOVE DISC CANNOT RECORD CHECK THE DISC Explanation You have not set the time zone, date and time. This message 26 appears each time you turn the power on until you set the time zone, date and time. Battery pack is exhausted. Replace or charge the battery pack. 19 The camcorder has exceeded its operational temperature. - Disconnect the compact power adapter and remove the battery and let the camcorder cool down before resuming use. There is a problem with the disc. Replace the disc. 22 This message can also appear if condensation has formed. Wait 101 until the camcorder dries completely before resuming use. The disc's recording surface may be dirty or scratched. -