Canon Color imageCLASS MF8450c imageCLASS MF9170c/MF9150c/MF8450c Starter Guid - Page 35
Scroll Wheel to, the display. Use
View all Canon Color imageCLASS MF8450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
- The "Setup Guide" only supports IPv4. - By default, the IP address is automatically assigned to the machine by the DHCP server. 1 Make sure the following screen is displayed on the display. Use or (Scroll Wheel) to select or . 2 Set Up the Machine 2 Make sure the following screen is displayed on the display, then press [OK] to proceed to the "Setup Guide." A: When you use the machine through the network, select then press [OK]. B: When you do not use the machine through the network, Select , then press [OK]. (Go to "Finish 'Setup Guide'," on p. 35.) - If the LAN cable is not connected to the machine, a screen instructing you to connect the LAN cable will appear before this screen. - If the machine dose not get the IP address 3 minutes after you connect the LAN cable, check the IP address settings and the network cable. 3 Make sure the following screen is displayed on the display, then press [OK] to proceed to the "Setup Guide." The setting for IPv6 is not supported with the "Setup Guide." When you want to use the machine on the IPv6 environment, select and set it up after finishing the "Setup Guide." See "Network Settings," in the eManual. 33