Canon Color imageCLASS MF8450c imageCLASS MF9170c/MF9150c/MF8450c Basic Operat - Page 445
If the Delivery Feeder Unit Is Not Installed Correctly
View all Canon Color imageCLASS MF8450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 445 highlights
If the Delivery Feeder Unit Is Not Installed Correctly If the Delivery Feeder Unit Is Not Installed Correctly If the delivery feeder unit is not installed correctly, an error code appears on the display. Follow the procedure below to install the delivery feeder unit correctly. If the error code does not disappear after the delivery feeder unit is installed correctly, contact Canon Customer Care Center. - You have to remove the delivery feeder unit and re-install the delivery feeder unit correctly. - When you remove the delivery feeder unit, you have to turn the main power switch OFF. - Sending or receiving documents cannot be done when the main power switch is OFF or the power cord is disconnected. - If the main power switch is turned OFF, all jobs waiting in the print queue will be erased. - Documents received into memory and documents stored for delayed send will be retained for approximately 60 minutes after the power cord has been disconnected. 1 Turn OFF the main power switch and disconnect the power cord. Make sure that the Processing/Data Indicator is turned off and check the display to confirm that a job is not being processed. 2 Open the front cover. If you are using the stack bypass tray, close it before opening the front cover. Open the front cover gently holding the handle (A). Troubleshooting 12-22