Canon Color imageCLASS MF8450c imageCLASS MF9170c/MF9150c/MF8450c Basic Operat - Page 449
Message, Description, Action, way holding the right & left grips.
View all Canon Color imageCLASS MF8450c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 449 highlights
Error Messages Message Check the cable. Check the originals. Clean the scan area. Hang up the receiver. Insert the toner cartridge all the way holding the right & left grips. Load paper. No response from the destination. No response from the server. Check the settings. Description The machine and cable are not connected properly. Paper or originals are jammed. The feeder scanning area may be dirty. The receiver of the external telephone is off the hook. A toner cartridge is not installed or not installed correctly. - No paper is loaded in the paper cassette or multipurpose tray when copying or printing. - If the paper size is not appropriate for printing, appears. - The appropriate paper for printing is not loaded. - The server was not running when you tried to send. - The network connection was lost when you tried to send. (Either you could not connect to the destination or the connection was lost before the job could complete.) - A TCP/IP error occurred when you tried to send an e-mail or I-fax. The specified server settings are incorrect, or the server is not turned ON. Alternatively, the machine's TCP/IP resources may below. Action Turn OFF the machine, check that the machine is connected to the network using the proper cable, and then turn the machine ON. Remove any jammed paper or originals. (See "Clearing Jams," on p. 12-2) Clean the feeder scanning area (See "Scanning Area," on p. 2-3), then press [OK]. Hang up the receiver. Install the toner cartridge correctly tray. - Load the paper correctly by inserting it all the way to the back of the paper cassette. - Set the appropriate size paper for printing, and specify the correct size of paper in . For printing reports or lists, set the paper size to , , , , , , , , , or , and then load paper of the same size. - After setting the appropriate size paper for printing, specify the correct size of paper in the menu. - Check the destination. - Check the status of the network. - Check that the network cables and connectors are properly connected. Wait for a while, and try browsing again. If you still fail, try selecting another server. Troubleshooting 12-26