Canon EOS 20D WFT-E1A Utility 2.0 for Mac OS X - Page 34
Automatic Image Transfer After Each Shot
UPC - 013803044430
View all Canon EOS 20D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Automatic Image Transfer After Each Shot You can transfer the image automatically to an FTP server right after it is taken. You can continue shooting even while an image is being transferred. Be sure to insert the memory card in the camera when shooting. 1 Select [Image transfer (LAN) settings]. 2 Select [Automatic transfer]. ¡ Select [Enable]. 3 Take the picture. a The captured image will be transferred to the FTP server. ¡ During the image transfer, the lamp will blink. ¡ Images cannot be transferred if the memory card is not inserted. ¡ During the image transfer, do not turn off the camera's power switch. Doing so will interrupt the image transfer. If there is any image whose transfer failed or was interrupted, you can transfer it later in a batch. ¡ During continuous shooting, the images will be transferred in the order they were captured. ¡ The captured images will also be stored in the memory card. 34