Canon EOS Rebel T3i 18-135mm IS Lens Kit EOS REBEL T3i / EOS 600D Instruction - Page 29
Installing and Removing the Card
View all Canon EOS Rebel T3i 18-135mm IS Lens Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing and Removing the Card The card (sold separately) can be an SD, SDHC, or SDXC memory card. The captured images are recorded onto the card. Make sure the card's write-protect switch is set upward to enable writing/erasing. Installing the Card 1 Open the cover. Slide the cover as shown by the arrows to open it. Write-protect switch 2 Insert the card. As shown by the illustration, face the card's label side toward you and insert it until it clicks in place. 3 Close the cover. Close the cover and slide it in the direction shown by the arrows until it snaps shut. Possible shots When you set the power switch to , the number of possible shots (p.33) will be displayed on the LCD monitor. The number of possible shots depends on the remaining capacity of the card, image-recording quality, ISO speed, etc. Setting [1 Release shutter without card] to [Disable] will prevent you from forgetting to insert a card (p.166). 29