Canon MF6590 imageCLASS MF6500 Series Reference Guide - Page 117

Before Using the Machine 1 Document and Paper 2 Copying 3 Sending and Receiving (MF6595cx/ MF6595/MF6590 Only) 4 Printing and Scanning 5 Network (MF6595cx/MF6595/ 6 MF6590/MF6540 Only) Remote UI (MF6595cx/MF6595/ 7 MF6590/MF6540 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 10. Press [ ] or [ ] to select the desired Ethernet connection type, then press [OK]. : Establishes a 10Base-T network connection. : Establishes a 100Base-TX network connection. 11. Press [Stop] to return to the standby mode. 12. Restart the machine. Back Previous Next TOP ˙ Communication Environment Setup To set up a configuration for communication between the machine and computers on your network, use the following procedure. SNMP SNMP (Simple Network Management Protocol) helps monitor the state of the machine and collects information on it. The default setting is for and for . The following two items can be set: : Sets the SNMP community name. You can specify up to two community names. The default setting is for COMMUNITY NAME 1. : Enables the computers on the network to access the machine and modify its settings if this item is activated. You can specify this setting for each community separately. The default setting is for SNMP WRITABLE 1 and for SNMP WRITABLE 2. 1. Press [Additional Functions]. 2. Press [ ] or [ ] to select , then press [OK]. Table of Contents Index 6-7